Get the kids into sailing ! - RC model land yacht project suitable for schools.

See also :-

A ship that I served on 1966 - 1969 Scratched Built. (Sails well)
Wiesel German Torpedo Boat was given by a family who had dropped it and smashed completely had to rebuild(persons were going to dustbin it + radio and engines SAVED( and sails well) HMS Daring sailing at Maunsell Lock 18th Aug 2019 also Bismark making its Maiden Sailing after many trials in the Bath Great Day Out with Tone Valley MBC

Was given this as a hull which had been started 25 yrs ago, along with some superstructure parts. Without other materials to finish it off, I gave it what I could find and here is where it is today.

Motor is 340 Graupner geared 3:1 & 7.2v 2400 NiMH

Can not provide any specific sailing details until it has been in the pond which could be awhile...se my front and back yard!

my japanese torpedo boat built from kit sailing on our pool at the hooton park trust site ellesmere port

Nice day sailing down the pool today with my Model of
PS Waverley

a compilation of a nice sailing afternoon in west kapelle (the netherlands) with a view underwater

Just renovated this one not been used of several years, I need to get back into sailing, was running on a 400 size motor now on a outrunner Mystery D2632-100 and it seems to go very well, will post it on the water later.

Some pics of a couple of Norfolk Broads sailing yacht classes I have constructed to precise detail externally, which were built on the Broads as holiday hire fleet craft in 1947 and to the present day.
One is 1:8 large scale and the other 1:18 scale. The larger scale yacht required a suitable detachable keel bulb for radio control use.

This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.

My dad built this over a long period of time, starting in the '80s. The hull is fibreglass and the rest is scratch built from plastic card, balsa, ply, wire and anything else he could adapt.
Although he installed the motors, props and rudders he never completed the RC installation or tested it. I inherited his boat models a few years ago and wanted to "finish the job", getting the model on the water. After installing the RC gear and batteries over the last few months, this weekend was the first sailing outside the bath at the Valley Gardens boating lake.
Happy to report that it sailed really nicely, seems to be reasonably stable although I did restrict it to calmer times when the MTBs and faster boats weren't running !
HMS Cadiz was a battle class destroyer, laid down and launched during WW2 although she didn't receive her commission until 1946 so didn't see combat with the Royal Navy, serving with the home fleet. Due to the changeover in pennant numbering she was originally allocated R09 and later, when the admiralty decided to revert to the D for Destroyer pennant numbering she was assigned D79. To reflect this my model has D79 on the starboard side and R09 on the port side.
She was sold to Pakistan in the late '50s, and renamed PNS Khaibar. She was sunk with the loss of nearly all hands in 1971 in the indo-Pakistan war.

On the pond today. Sailing well, though took on water easily over the combing into the cockpit. So back home I added a clear covering which should take care of that problem.

I thought as the lake is still full of weed this would keep me sailing built from light ply fibre glassed inside & out then painted length 33" width 12"height 16" to top of the prop
70 amp esc aircraft brushless motor 11" prop

I am busy with a landing craft i thought this would be another one to beat the dreaded weed 😱