This is my model of the KG5. Futaba 2 ch, electronize ESC, 12v 7amp gell cell battery. The motor is from a Ford radiator fan and pulls 1 amp current. Scratch built in the 60.70s and revamped in the 90s by myself. it is 1/96 scale @ 72 inches long and a width of 14 inches.
Saved from a farm rubbish bin and restored. It was originally scratch built from a 60s/70s RCM ? plan. Photos of rebuild are in the harbour. Not sure if it was originally built in the UK and immigrated to NZ as it's an unusual subject for a NZ build. Plans are apparently still available.
I've just found some info on Bates 'Starcraft' cruisers, UK. Looks like the original R/C plan may have been modeled on a version of one of the 'Starcraft' variants.
The farm is a fair way from the sea,- someone was not on watch obviously. Not my car, some guys doing building maint. We can park on that cobbled area you've pictured on the opposite side, (room for about 8-10 cars,-usually chokka when the yachts are racing) There is a nice little jetty built by the Gulf Harbour Model Yacht Club next to it which is great for setting up and launching. It's all part of the big Gulf Harbour Marina development and pond is actually a drainage control pond.
Was full of Koi carp to keep the weed down (carp were rented from a company by the council, but there was some dispute and the company came and removed their carp) probably missed a lot and they breed like flies, so it should come right. Pond's pretty weed free all the same. Pics of the jetty (from the HSL) with some old codger sitting on it, and the real HSL in the Bayswater Marina (Waitemata harbour Auckland), which I have been on board (once recently,-Modded- and once 50yrs ago-original form) Its' story is on the Waitemata Woodys website under W1.
The other pond is at the Onepoto reserve near the city on the waterfront. Bit of a drive (20mins down the motorway all the way) Yachts there as well. The pics with the Marine modellers club - Panmure Basin - East Auckland (the only scale model boat club in Auckland and virtually dead (pics are old), - only about 3 or 4 scale clubs in the country!) we tend to go more for the full scale here. Evening, JB
This Swede Johnson and his yawl and its captain, Popeye. Swede pasted away several years back, I wanted to post this in his memory. He scratch built all of his boats over the years and was well know for his leading edge designs like the US1 Meters and Marbleheads. He taught me to scratch build boats and sails. Yes, Popeye's arm moves with the acting tiller.
This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.
Just converted this 40yr old twin brushless model (scratch built from a Vic Smeed plan) to a proper independent twin system plus a sound unit. Started off with a 70s Futaba ESC on 27mhz, then on FM, then replaced with an Electronize unit on FM, then to 2.4 and now on 2.4 with twin ESCs and converted TGY S6 (twin throttles). Maneuvers a lot better and makes a better noise.
Nice job.Great to see a boat running built from a Vic Smeed plan.Should do good in a steering competition with the manouverability you have.Lovely boating pond.
Thanks for the nice comment, and yes it is a very nice pond, except when there are a lot of those things with rags tied to sticks racing (shouldn't say that as I've sailed full scale all my life and still have 2 small yachts), and the buoys they leave there are a pain also, (easy to forget they are there) it was full of hire carp (yes hire carp) which were removed as the council wasn't paying the company or some such hassle, but I'm sure they missed some and they will soon multiply and keep the weed down. Bought the plans for the MTB around 1968 and took around 20yrs to finish it. I still have the plans and it only took me about 40yrs to find a photo of the original boat (bit late by then!).
Scratch built, made up as I went along started off with single prop but much better wth 3 bladed, size is 24 x about 10. Model driver is KEN. And has been decapatated once and rebuilt using another head. Speed is good but steering not brilliant on one rudder.
Thanks am going to make another one which will incorporate a pusher prop . At least that’s my winter project when all my fleet have been dry docked etc, did one last night ( 42 inch pilot boat ) a V.T. Nelson. Only another 14 to go.
Looking good, but shouldn't there be a safety mesh between crew and prop. Good thing he's got short hair.
Joking aside, it's good to see different forms of waterborne transport.
Cheers Colin.
Now there's a coincidence!😲
I recently saw a documentary about this ship, I think was in the 'Lost Places' series. Took her months to sail to Oz. Not much left now 😭
Interesting prop, looks like the style used in Kort nozzles and water jets. Colin; Rabeosch & co do these types. See attached cat.
Very nicely done Sir, 👍👍 Any chance of a video of her in her element?? 😁
I found this hull at thingiverse last year. I printed the hull from a local shop and rest was handmade.
Firstly I bought a 2426 4200kv brushless 2-3s which was too powerful and too heavy for the boat size. The length is 38cm.
And the 30Amp esc was also too big for it's size.
After that I tried small 180 brushed motor with 20A brushed esc w/brake. it was perfect (still it's heavy😂).
The bridge and deck is made by 1.75mm pvc,torpedos are made of wooden pencil.
Small battery space takes a 2s 500mah lipo. 30mm 3blade propeller.
Excellent video Sakibian, well done👍
and you're very brave to sail such a tiny boat in waters like that 😲
Hat off Sir 😉
Cheers, Doug 😎
BTW: you should put this boat in your 'Harbour', just click on 'Boat Harbour' on the left of the Home page and then 'Add your model boat' at the top.
Happy that you liked the video , will try to post more videos.
And please don't call me sir haha? I'm still 23.
About the harbour , when I registered here I didn't find my country (Bangladesh), can you please do something while your an Admiral 😛
That won't work 🤔
You have to put the video up on YouTube and then post the link here.
Doug 😎