On Halloween morning Sunday Oct. 31 2021 ran the Sequin with several other club members at Spencer's pool may be last run this year with weather getting cooler . The lake freighter was her first run & just needed a little ballast weight at the stern prop wasn't deep enough Boat belongs to a fellow club member .
Bionic Bill and Ben ready for an outing on Halloween today 😂🤣. Sadly the weather is so awful that they can't get on the lake as they would just be blown to the far side.
(Apologies for the shaky video, trying to operate the Tx while holding the camera)
Here we have a selection of boats sailing amongst the autumn colours at the "Pavilion Gardens Lake " Buxton, Derbyshire in early October 2021.
Music is from Bensound - "The lounge".
Found it would fit in the paddling pool, so being a nice sunny day, thought it was about time to wet its' bum. So bright today, smoke and water was hard to see, (I can't win ! - either too bright or too dull😐) Anyhow, everything works well, (just need to adjust the rudders,- bit of right needed), plenty of grunt (only about 1/2 throttle max here,- mostly just 1 motor - don't want to bash the paint off !)- bit hard to control in a small tub !,- needed someone to hold it.
Next stop, the lake !, after I modify the launching trolley and making a stand. Unfortunately can't demo the stereo working due to new YT music censoring rubbish. No different to sitting at the beach with a radio, but YT warns you about copyright which is just moronic.
Hi Bill, wasn't game to try that, kept trying to bash itself to bits. Hopefully be out to the pond soon, just sorting the launching trolley out. Restrictions make waiting for things (sponge tubing in this case) a pain, slows every simple 5min job down to days.😐
Hi Peter, wasn't room for a heck of a lot of testing really, and nowhere to tie anything to that wouldn't have damaged something. The music is a problem because of the algorithm YT uses. seems to pick up the most obscure music (even old rare 70s stuff) and starts warning you about copyright . Don't know how it does it, but I've even tried Cuban music, and it still picks it up (mind you who's going to have a go at you from Cuba😁) The bit of rubbish stuff I made on a free beat site got past it though,- strange ??
Even if you play the music,- (obviously in the model vid) it will still pick it up,- and if someone is parked next to you in a car with the stereo going and you are recording something else!! This is just beyond stupid, as you are using it for private purposes and not being paid for doing it. Seems like the whole world is - 'cant play this, can't record this, can't video this, can't have kids playing on swings, might hurt themselves, can't make noise' etc etc. The govt can record people without them knowing, but you can't !!! All about control. I'll do a vid on the water with music - "I was just videoing someones' boat sir" and see what happens.
View from on board my Cutter sailing on the Pavilion Gardens lake in Buxton last weekend.
The video is running slow at 70% speed as I think it looks better at that speed.
Hi Cash,
Interesting to see what you guys are putting on the water. Now as an old fashioned sailor girl, I must admit to having a liking for that lovely wishbone schooner. She was gorgeous. I wish we could have seen more of the other sailing craft too, there was another smaller schooner that looked interesting as well as a couple of sloops.
Hi Nerys!! How you doing? The schooner is a customized Robbe “Atlantis”. The owner, Stephen, mad a few mods to make it look more realistic. The other large sailing craft is a racing boat in the Canterbury J class, the two smaller sloops are Micro Magics. Our little club is starting to grow a bit😀
My Vic Smeed Thornycroft MTB has been sitting in dry dock over the summer, due to holidays but also procrastination due to my fear that when I finally launched her she'd go straight to the bottom...
Anyway, this morning I plucked up courage, took her down to Black Park lake near Slough and chucked her in. She appeared to sit well in the water. I gently engaged the throttle and waved a tearful farewell as she moved off 20 yards or so towards the middle of the lake. I took her round in a wide arc and back to port. I repeated this a couple of times and did some straight runs until the tiller mechanism jammed, fortunately she was within grabbing distance.
I was so relieved and pleased that she worked. She had a good turn of speed (nothing too dramatic) and seemed to steer well, keeping fairly upright.
There appeared to be little if any water ingress. The water cooling system for the ESC didn't work (I suspect kinks in the tube) but it didn't appear to be overheating. I'll attend to that and also the tiller mechanism before I take her out again.
Must be pretty solid Nick, mine weighs 2.8kg with a 3s 3000mAh LiPo. Ply from memory was only about 1.5mm. Nothing wrong with a bit of weight, makes them run a bit more realistically. The originals looked like they were sinking with the weight of the fuel and 4 big heavy Thornycroft v12s in the back.
yes i was a bit taken aback when i weighed her, but to my untrained eye she seemed to sit ok in the water and i didn't really want her skipping over the ripples 😂
Typical yorkshire weather, after 5 minutes it chucked it down so had to make a quick retreat. used just one 2200 3s lipo for now but need a bigger lake/pond really as can only give full power for 3-4 seconds, so stop -go is not good but was hoping to get some good photos-videos, but the rain stopped play till another day.
Edit, forgot to mention. most of run on centre prop only. the last 5 seconds or so is full power, well nearly.
Looks good Roger,
Whilst the comments on paralleling LI-POs are correct. I have never had an issue. I have used two identical cells and fully charge each separately until the charger cuts out.
Would never try two partially discharged cells as then the current might flow from one to the other creating the overcharge rate problem
Recently decided that rather than use two cells, why not use one at once? This reduces weight and eliminates the concern.
Think you need a larger pond! Glad to see the weather is consistent with my memorys.
Rowen
Well, it's been 6 months since the last video at SMBC... but we're back at the lake tomorrow with Scale & Sail (if it's windy) and socially distanced on the lakeside... so hopefully we will have some footage to share of the boats, maybe even some new boats? in the meantime here's a link to the last video I did. Enjoy
HARTLEY FLARELINE, FIRST CRACK AT TRAILER LAUNCHING.
I decided to risk a salt water trial, as there is no place I can think of with fresh water and a smooth beach or ramp which doesn't involve a 100 mile round trip (most beaches where I am are ocean beaches and others are soft sand/shell. The only lake I can think of is 112km away and I'm not THAT keen. Launching went ok but retrieval was another matter, not helped by an 8mph side wind (looks calm but is windy) Had a number of goes and discovered a few things which need changing, (extra front guide posts and rollers either end of the pads) The rubber resting pads stick like glue so I'll have to make some pop up rollers at the ends.
The pads hold the boat slightly above the centre rollers to avoid damage and stop it sliding off while shifting it. New front guide posts are needed as the boat only draws about 30mm and goes right over the trailer with it underwater 😮(no prop or rudder sticking out,) so it might help locate it when coming in. Jeep had truckloads of power (just fitted a new even lower geared -geared motor -1000rpm/min @ 12v), but unfortunately being only 2x2 (not 4x4) and being half the weight of the boat/trailer combo it couldn't get a grip in the mud, so needed a bit of assistance, (as did the boat getting onto the trailer). Cut out most of the vid with the boat missing the trailer about 10 times, but scored a direct hit once😊. Heaps of fun trying and heaps of washing and CRC when I got home! Going to need some new bearings at some stage, - the ones in it are rubbish and have only lasted for about a few hours running, noisy as anything now, even with gallons of oil. Stainless NMB ones next if I don't change the jet to something else, (another thought on propulsion happening)💡
Hi JB - Martins eBay one looks like the place to start - add metal diffs and a good body - away you go .
Was thinking its a pity you are stuck with two transmitters - be nice to only use one like the old Futaba/Graupner F14 set they used for the German Rescue & Daughter boats..........
Hi Peter, I could probably drive the boat on the right stick, and the truck on the left stick of the 9x TX,- I'd just have to sort out the smoke/air/water pump starting, which at present uses the left stick moved right and left to start/stop. The smoke etc doesn't run all the time, (just for starting as a display thing) and can be turned off at any time with Grahams clever little control board. It's not too much of a problem really though,- if I was better organised, I could probably hang one over each shoulder (or clamp them back to back)😁
