Knightcote Model Boat Club. Film is of boats David Pledge and I have developed -- to be sold as kits soon. The Diana and Huntsman are tiny and powered by micro brushless motors. CR1700 is a new brushless club racer. See us at the Warwick show this week!

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

This Boat was bought as the City of ELY Merchant ship, I am in the middle of converting it into the SS John W Brown which was an armed merchant ship built during the second world war. This ship will now sail with the grey funnel section which is part of the Cygnets Model Boat club Maidstone
It has had a complete hull respray, gun platforms built along with new radio control parts and now lights

Following the legendary Keil Kraft Eezebilt plans for a Royal Air Force Crash Tender boat from the 1950's.. Plans exploded to 130%. Trying to build it completely out of Foam Board.

Completed model should be around 27" in length.

This is my scratch built inshore fishing boat, I adapted the plans from a model boat mag. The hull and deck are planked using cut up blinds from Ikea (they are made if Lime) it has working lights and radar via a 4 way switching unit on one channel, the working winch and trawl net are worked from another channel. Powered with an 18v drill motor working from 12v lead acid battery

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!

My own design deep "V" hull with upper-works loosely to 1:15 scale replica of the Mitchell 31 boats previously used by various Hampshire constabularies in and around the Solent. The intention is to fit this model with a working, rotating, radar scanner using the servo motor and gearbox from an old video camera lens system; working lights including flashing blue police lights and a sound-alike "wee-wah" siren - just for the hell of it (and because I can)! Technical details: Hull length: 867mm. Construction: GRP layup with 1.5 and 3mm ply and balsa deck, cabin etc. Motor: MFA Torpedo 850. Propeller: X50mm plastic. Battery: 2 x three cell LiPo pack in parallel. Speed controller: Mtroniks Viper 25Amp. Radio: Hobby King 2.4GHz.

HI fellow model leers.this is my latest model.Built in 1926' for the Ffyfe(bananas) family. Originally it was run on steam,but in 1939 converted to diesel,this was kept until 1957 when all the staterooms were replaced by cargo holds . She was then made into a feeder bringing eleven thousand boxes from Rotterdam to Southampton. She was scrapped in the seventies.my model of her was from 1926 the scale is approx 1/30th her length is 48 inches including bowsprit, and has a beam of 10 inch amidships. She is totally scratch built, plank on frame, all the decks are individually planked with black card in between , wheel house and all other parts are mahogany. She runs on a decaperm geared motor @ 6 volts, and the lighting system consists of 10 accommodation lights, port and starboard , wheelhouse, and both mast headlights,the large saloon skylight is also lit up with a set of disco lights on a separate circuit. The funnel houses a heavy duty smoke unit switched on by switching unit.

Just a few photos of my first scratch built model. Although it is supposed to be a simple model to make (according to the plans) I am finding it to be quite a challenge.
I am sure my experienced Club members (CADMBC) will pass on advice when required. Ian

just a few more shots and I would like to say many thanks to the people that has commented and gave me some hints and tips through the build from this very good website,well done Modle Boat Website

Help, Has anyone had trouble with the robby bow thruster recommended for this model,mine has been used about three times and it keeps siezeing up I am not very Impressed with them,can anyone reccomend a good one that I can fit in its place.

at last I took it for its first run on the lake and it went like a dream,can't tell you how good it looked lots of interest from others,its running on twin Emax EL4030/10 motors,two Hobbywing 60 brushless speed controllers and four 18.5 volt 5s1p LI polymer 4000 mah 35c batteries .what can I say but a really good kit from speed line models,would love to build the trent now but don't think the wife would let me go missing for another year in the shed but fingers crossed

Just a short video of Ian Pott's recently completed Model Slipway Tamar lifeboat. Looks and sounds good with action sound unit