This 'Whaleback' boat is a 1/16th scale Air Sea Rescue Launch that was built by a friend of mine Graham. It is powered by a Turnigy brushless motor and Lipo Battery

Upgraded to Brushless 2x1100kva Turnigy motors, Scratch built 1/24 scale. I've included a photo of a real one, just in case somebody else tells me the colour scheme is wrong, East of Gibralta they where white. I'm sitting on the engine hatch nearest the camera, that was 1969

This Higgins PT boat was built and sailed by a good friend of mine. it is scratch-built. it uses a single Turnigy 3639 1100kV brushless motor and LiPo battery. it is pretty new and has not had its number painted on as yet. its performance is excellent.

Aeromarine Laminates Predator 21 hull with HK 2630kv brushless outboard and Turnigy 120a w/c esc. Waterproof metal geared Servo and will have 4-6s lipo when completed.

NOW SOLD

Motorboat
Length: 610 mm
Width: 195 mm
Material: plywood 4mm plywood airline 0.8mm, ironing mahogany bar.
Engine: AC Brushless Turnigy XK2845-1980KV inrunner
Controller: 40A
Battery 2x 2200mAh 30C 3s Lipo

Single 550 Brushed Motor and Reversible ESC, 2S LiPo, 2.4GHz Radio System, Turnigy Blue Prop, 2 x 9G servos for rudder and lights.

Functional Nav Lights and wailing siren.

OA Length 690 mm, Beam 180 mm, AUW 1656 grams.

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

First trials of freshly restored 1970s Aerokits Swordsman rescued as a wreck from ebay (I was the only bidder it looked so bad....!) earlier this year. Was diesel powered and had loads of lead ballest glassed into hull which had to be cut out and replaced with new ply with the rest of the structure lightened and stiffended with new ply. Now fitted with Turnigy 600 Typhoon Brushless and 90A Seawing ESC and 55 min Graupner prop. Handling is excellent and turns really well using a small size Graupner rudder with fast acting large angle Hobbywing servo. Joined my collection of 34 and 46 Fireboats, Sea Hornet, Sea Queen and Commander, all restored over the past 3 years. Aerokits have come into their own with clean and quiet brushless power we could not dream of in the 1960s

Two Yeoman / HMM boats- both salvaged from e-bay and thought to be at least 55 years old. each having had most of internal structure removed. no drawings available so had to guess where 'bits' were needed. The smaller 'Minx' is powered by a brushless Turnigy Aerodrive SK286. The 'Wavemaster' has a brushless KD Thumrun 2387/18 and an EZ Run 18a ESC - supplied by Giantcod. First runs at Crealy - 29th July.
Thanks to Ian for the photos.