Lady Wooes, by Mobile Marine of Lincoln. SemI kit. I bought the hull all the timber and drawings along with dozens of white metal fittings ages ago, started it and left it for 5 years, moved to North wales and finished it. Drive is 2 Ford Cortina fan heater motors driving a pair of 55mm Prop Shop props by tank steering, reciprocating steam engine sound board, smoke unit and full working lights all from 2 X 12 v 7 Amp batteries........a good and interesting but very frustrating build to get things right.
Sailed at Erias Park, Colwyn Bay Model Boat Club and sometimes at West Shore LLandudno.

Hello from Australia Thought it was time I made a an effort. Three of my models shown here at last years local model show in Port Macquarie. L to R they are Cervia,now 20 years old,Wyola, an Australian built tug.Twin motors and Kort nozzles.and Old Trafford, MSC paddle tuc in 1/35 scale. All are totally scratch built. The only things bought were materials,paint and glue, Except the stantions for Old Trafford. Currenly finishing a Maycraft Mercury(started in 1962 in England) and a Vosper fireboat.Hope this may be of interest

Mantua models 'Amalfi' Scale 1:35 Length 400mm. Fishing boat converted to 2 CH RC. Sails well, freeboard a little low but ok. Nets detactable for heavier weather sailing!

Photos show her on home 12' dia. pool but she sails well on boating pond. Runs for 20mins. on 4xAA batteries all in.

Model Slipway kit - super detailed. 2CH RC with mixer to provide engine, whistle and smoke. 1/48th scale.

Excellent kit fitted with ACTION electronics.

RAF High Speed Launch, speed 400 motor,Mtroniks Viper 10,ESC. 7.2v 3300Mah, model is 22".Scratch built, from photos and my own drawings scaled down and modified from my aerokits fire boat, I get about 15 minutes on the water running time on full speed.

Just aquired a Matchbox Corvette, will be sorting it out over next few weeks there is a lot missing but have lots of photos from another club members model to work from. Will see how it goes.

This is a aero -naut toben tug it is kit built it has a aero-naut 6v geared motor it runs on a 6v 4amph sealed battery has a old type speed controller sliding arm type the battery last in excess of two hours its great with korts nossole steering the hull and cabin are abs and the most water proof boat I have ever sailed on Southport model boat club one of the fleet have changed the set up have a old mfa electro thottle esc in instead now yet to try the new setup

HI All, I had a request for infomation on the Motor and Gearbox setup that I have fitted into a Wavemaster, a Sea Commander, and Fireboat, all shown in various posts of mine. The gear boxes are fitted with a 2.92:1 reduction gear, and were purchased from Hong Kong on Ebay, this is the information if I can publish it in this post. I mount the gearbox this way up to position the motor in the boats as low as possible.

RC Model Big Size Metal Gear Box
http://www.ebay.co.uk/itm/RC-Model-Big-Size-Metal-Gear-Box-with-3-Metal-Motor-Gear-for-R-C-Airplane-GB090-/270842196092?pt=US_Character_Radio_Control_Toys&hash=item3f0f73f07c

Ebay Number

270842196092

Specifications
Material: Steel Brass and Aluminium
Main Gear: 38 Teeth Aluminium
Motor Gear: 13 Teeth Brass
Gear Rate 2.92:1
Prop Shaft Diameter: 4mm
Prop Shaft Length: 13mm

Hope this helps those who have asked Graham

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

this is a slightly modified RTR tug Southampton the main casing has been lowered and a bigger battery fitted, but she still has the original motors and props, she is seen her towing a large barge a flat top pontoon ,a small tug and a Graupner German patrol boat, with a model slipways Envoy doing its best to overturn the lot.

these tugs are all 1/32nd scale the tug doing the main towing is a modified Cruiser kit, and the tug dragging on aft is a scratch built tug called the SIMLA she was originally built for wm watkins london and worked the Thames for nearly 80 years.
the model is electric powered with a 12 volt system, the tanker is 16ft long and has her own power as well (just in case). 😯

The four tugs in this clip are all 1/24th scale and are scratch built,they are the Ionia, The contest, the cervia and The Atlantic Cock, in their real form they were all River Thames Tugs.all of the models were built within the last 11 years and are all still going strong. Unfortunately all of the real tugs are all scrapped now except for the Cervia , she is now preserved in Ramsgate Harbour Kent.