This Boat was bought as the City of ELY Merchant ship, I am in the middle of converting it into the SS John W Brown which was an armed merchant ship built during the second world war. This ship will now sail with the grey funnel section which is part of the Cygnets Model Boat club Maidstone
It has had a complete hull respray, gun platforms built along with new radio control parts and now lights

Manta Ray from Ware House Hobbies USA.Powered by a Zenoah 26cc mod engine,fitted with Hitec radio gear on board battery indicator and a fail safe system.Appro 55/60 mph great fun although thinking of giving it up now.

My own design deep "V" hull with upper-works loosely to 1:15 scale replica of the Mitchell 31 boats previously used by various Hampshire constabularies in and around the Solent. The intention is to fit this model with a working, rotating, radar scanner using the servo motor and gearbox from an old video camera lens system; working lights including flashing blue police lights and a sound-alike "wee-wah" siren - just for the hell of it (and because I can)! Technical details: Hull length: 867mm. Construction: GRP layup with 1.5 and 3mm ply and balsa deck, cabin etc. Motor: MFA Torpedo 850. Propeller: X50mm plastic. Battery: 2 x three cell LiPo pack in parallel. Speed controller: Mtroniks Viper 25Amp. Radio: Hobby King 2.4GHz.

Apologies for the blurred pictures of the boat on the water.
Not easy trying to use 35mm SLR with telephoto lens and radio control at the same time.
More boat details to folloe.

Steve

My model of Soclaine (MGS) Built in 1985. Trawler kit originally called le Zenith 1/24 Scale. My name change is in memory of our beautifull daughter who went to heaven just over four years ago. Anyhow model is beautifull on the water powered by Como MFA 919 Series Electric Motor.
All power is from a lead acid 12 volt battery,lights, running gear . Using a simple set up of two channel Planet T5 Radio.
I sail the boat at Rutherglen Boat Club Glasgow. The weight of this boat is really awesome and I kept adding lead untill it was nearly Impossible to lift,must be getting soft in me old age.. 👍 lol Deck crane is made from odds n ends and an addition..IAN

HI All, I had a request for infomation on the Motor and Gearbox setup that I have fitted into a Wavemaster, a Sea Commander, and Fireboat, all shown in various posts of mine. The gear boxes are fitted with a 2.92:1 reduction gear, and were purchased from Hong Kong on Ebay, this is the information if I can publish it in this post. I mount the gearbox this way up to position the motor in the boats as low as possible.

RC Model Big Size Metal Gear Box
http://www.ebay.co.uk/itm/RC-Model-Big-Size-Metal-Gear-Box-with-3-Metal-Motor-Gear-for-R-C-Airplane-GB090-/270842196092?pt=US_Character_Radio_Control_Toys&hash=item3f0f73f07c

Ebay Number

270842196092

Specifications
Material: Steel Brass and Aluminium
Main Gear: 38 Teeth Aluminium
Motor Gear: 13 Teeth Brass
Gear Rate 2.92:1
Prop Shaft Diameter: 4mm
Prop Shaft Length: 13mm

Hope this helps those who have asked Graham

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

Owing it's origin to the RNLI lifeboats of the 19th century, the US Coast Guard 36'MLB saw service from 1900 to 1987. The USCG built over 300 boats of this class in various "mods" spanning it's life history. Constructed of wood and fitted with a bronze keel it was powered by a 4 cylinder engine later modified with a diesel motor. Early powered 36' boats carried oars and sails as auxillary power. My 36500 model was based on the famous Chatham Lifeboat Station in Massachusetts, USA. On Febuary 18, 1952 the CG 36500 rescued the 32 survivors of the tanker PENDLETON during a night time nor'easter storm. Without radio or radar the Coast Guardsmen found the stricken T-2 tanker in the blizzard, taking the crew off one at a time. With each pass of the lifeboat a tanker crewman climbed down a rope ladder and "fell" into the lifeboat. With all on board, the 36500 found it's way back to Chatham harbor much to the delight of the towns people and the Coast Guard! The most amazing fact regarding this rescue was that the 36 footers were only designed to carry 19 people, including the 3 man CG crew, without capsizing.
The model was scratchbuilt of balsa strips and aircraft plywood, using official USCG blueprints. Powered by a 6 volt motor and a 2 channel radio, the Chatham lifeboat is pleasure to run in my local pond.

Based on the US Coast Guard 36' motor lifeboat, the Canadian Coast Guard operated a number of these boats modified for cold weather operation. The model is a fiberglass hull, the reat is scratchbuilt using baltic birch wood, brass, and plastic. The model measures 28" based on the scale 3/4 inch equals a foot. it's powered by a 6 volt Dumas motor and operated with a 2 channel radio. A fun build!

This model was originally scratch built in 1964 by my Dad as a 15th birthday present for me,the length over all is 60.5" with a beam of 17.5" and a theoretical draught of 3.5",not sure as to the actual design but it is meant to be 1/12th scale, it was originally powered by a 12 Volt windscreen wiper motor out of an old Mercedes car, and the radio gear was a home made system as well, but both are now well beyond repair and I am fitting an MFA 800 Motor with a Fusion Aquapower ESC rated at 125amp. run by a new 2.4 Ghz radio system.
When I get to sea trials stage I will send Update and possible video footage.This boat along with the rest of my harbour, will be on view at the Abbergavenny Steam Rally this weekend June 3rd and 4th(Sunday Monday) in the model section marquee.

Here are a few pics of my Scout which wwas originally built in 1958, but left in my parents loft when I left home in 1966, but thankfully still there when my Mum asked me to clear the attic for insulation installers last year.
So far have cleaned it and fitted a MabuchI Brushed motor of unknown power, but appears to work well at 6Volts running a 2 blade plastic prop 30mm 'S' type.
Havent got round to fitting radio gear yet, so have done tests as a free sailer, setting rudder on a slow arc and watching as I walk round pond.Will update as soon as next stage is complete.

SemI Scratch build from a my hobby store plan and hull [only] kit. After 18 months its still an ongoing build 🔨 , as my research in to the original vessel continues so I can get it as correct as possible. 😯
I have managed to get all the correct light patterns on and working, as well as twin radar and now finally have got the crane to operate remotely from the radio transmitter. 👍