Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁

A Little bit forward , propshaft and rudders ar mounted
and some things on the superstruktion , im going to start with the running lights tonight

Have a nice day everybody
// Jörgen

The TVR1 BB steam engine plant running in prior to being installed in a Mobile Marine hull.

Just finished adding a crews quarters and pump engine house to the stern of my barge, then added the necessary bitts for stern pushing.

Shadowing of U-181 from the subcam on HMS Triumph at the Naracoorte swimming lake. There are other videos and detail photos of these submarines previously posted on this site.

This Swede Johnson and his yawl and its captain, Popeye. Swede pasted away several years back, I wanted to post this in his memory. He scratch built all of his boats over the years and was well know for his leading edge designs like the US1 Meters and Marbleheads. He taught me to scratch build boats and sails. Yes, Popeye's arm moves with the acting tiller.

Sea Maid run about, electric.
Reflections fishing boat, electric.

"Searcher" was a Graham Goodchild design offered as a free plan in "Model Boats" in December 1981. Here is my version , many years in the building and finally nearing completion. Access to the hull on the original design was via a hatch above the cockpit - I had no faith in my ability to make it water tight so went for removable grp. hatches. The model is activated by a reed switch just in front of the rear hatch, which saves me the hassle of doing/undoing all the nuts (this had not been fitted when I took the first picture). The rear hatch gives me easier access to the drive coupling. The name "Nimbus2" is in honour of one of Dan Dare's spaceships in the Eagle comic. The third picture shows the ship in its final state with added 'enhancements' and working lights.

Checking for size comparison and scale! The barge is 50 inches long by 12 inches beam, will draw 2 inches light and 6 inches loaded. I plan on making it an oil tank barge with a swiveling boom and two deck houses aft for the pump engine and housing for crew.

Scratch building a barge for my tugboat Miss Doris to push. May deck it over to become a tank barge I used to push on the Delaware River. if
i do deck it over, I'll hinge the deck to make use of the space for my RC gear.

Midwest kit East Coast Lobster Yacht. Single screw, pleasure to sail.

This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.