Mantua models 'Amalfi' Scale 1:35 Length 400mm. Fishing boat converted to 2 CH RC. Sails well, freeboard a little low but ok. Nets detactable for heavier weather sailing!

Photos show her on home 12' dia. pool but she sails well on boating pond. Runs for 20mins. on 4xAA batteries all in.

Model Slipway kit - super detailed. 2CH RC with mixer to provide engine, whistle and smoke. 1/48th scale.

Excellent kit fitted with ACTION electronics.

Original kit refurbished from a car boot purchase. 2 CH RC. Tried to retain orignal type features only with few extra fittings.

Taycol Meteor motor contemporary with boat controlled by servo operated resistance with sweeper arm on servo to reverse polarity at approx. midpoint.

Motor not powerful enough and max. speed disappointing so am planning to upgrade wiht more modern gear.

Super detailed HFM kit to 1/35th scale of Thames Sailing barge. No power, two channel RC. Often sails at Basingstoke.

RAF High Speed Launch, speed 400 motor,Mtroniks Viper 10,ESC. 7.2v 3300Mah, model is 22".Scratch built, from photos and my own drawings scaled down and modified from my aerokits fire boat, I get about 15 minutes on the water running time on full speed.

Just aquired a Matchbox Corvette, will be sorting it out over next few weeks there is a lot missing but have lots of photos from another club members model to work from. Will see how it goes.

This is a aero -naut toben tug it is kit built it has a aero-naut 6v geared motor it runs on a 6v 4amph sealed battery has a old type speed controller sliding arm type the battery last in excess of two hours its great with korts nossole steering the hull and cabin are abs and the most water proof boat I have ever sailed on Southport model boat club one of the fleet have changed the set up have a old mfa electro thottle esc in instead now yet to try the new setup

bought the bare hull off e-bay which was coverd in black spray paint yuk.

HI this is a Billing Banckert with an ABS Hull under Construction. Will add some more pictures later.
Regards Graham

Built from Scratch
this boat was built 10 years ago
will post ather boats when I have time.

I am new here anyway and hope you like my work.

Built From Scratch
this boat was built 10 years ago

HI All, I had a request for infomation on the Motor and Gearbox setup that I have fitted into a Wavemaster, a Sea Commander, and Fireboat, all shown in various posts of mine. The gear boxes are fitted with a 2.92:1 reduction gear, and were purchased from Hong Kong on Ebay, this is the information if I can publish it in this post. I mount the gearbox this way up to position the motor in the boats as low as possible.

RC Model Big Size Metal Gear Box
http://www.ebay.co.uk/itm/RC-Model-Big-Size-Metal-Gear-Box-with-3-Metal-Motor-Gear-for-R-C-Airplane-GB090-/270842196092?pt=US_Character_Radio_Control_Toys&hash=item3f0f73f07c

Ebay Number

270842196092

Specifications
Material: Steel Brass and Aluminium
Main Gear: 38 Teeth Aluminium
Motor Gear: 13 Teeth Brass
Gear Rate 2.92:1
Prop Shaft Diameter: 4mm
Prop Shaft Length: 13mm

Hope this helps those who have asked Graham