another photo of my asrl figures are modifyed american 1/32 multI pose airfix a 400 motor a 20amp esc and a 7.2 buggy pack it planes just great took it out today ran for over 3/4 of a hour and the motor never got hot it work a dream now to get my whaleback on the water same scale same firm but with mods on southport model boat lake today sunday
Built this year 2012 by Colin Burrows as a static model. Bought from him to make RC on 2.4. and currently fitted with a 600 motor that is too powerful, advise that was received from a fellow modeller, I am awaiting for a smaller unit to arrive to make it more authentic as it resembles a power boat rather than a trawler. Am also building a speed boat but have put out a request for wiring information as I have already blown up one speed controller!! lol.
I belong to a recently formed club sailing on the lake a Queens Park, Mablethorpe, Lincolnshire. New members would be most welcomed.
Realistic looking model. Low speed high tork motor would suit this. Model Motors Direct do a 555 which is excellent for most scale boats. What ESC are you using?
You can post details of your club in our Model Boat Clubs section, which should help any prospective members find you. 😀
Hi, I am using a Perkins 5510135 Marine 50amp esc and am awaiting a 25mm diam 300rmp motor from Hongkong to replace the Johnson 600 that is already fitted. it's a suck it and see job as I have no experience in the boating field my previous hobby was flying electric planes with lipo's and brushless motors. Going to fit proportional steam simulator, fog horn and whistle, have already fitted sound generator representing the 3 cylinder steam unit that would have been in the real thing. if you have any experience in the electronics field I would welcome help on esc requirement to power twin graupner 700BB Turbo motors.
HI there thanks for your kind comments, I bought this camera from Hobby King for about £20.00 last xmas, it works really good in aircraft as well. On Sunday I thought I had it switched on, and then sailed through the fleet for about 45 minutes, but no I had press the button twice, hence switched it off. The batteries were getting low when this was filmed thats why the shortness of the film, I was just concerned to get the boat back before I ran out of electricty. For a bit of cheap fun I would recommend one because you can see your lake from a different angle, if any of you fly that is really good fun.Thanks Brian
This is my tug Alte Liebe. it is a Caldercraft kit and is almost 1 metre in length. I have installed an MFA 540 motor with a 2.5:1 reduction gear and operate her on 6 volt SLA's. With ballast she is fairly heavy coming in at about 15 kg.
I have just added a photo of my tug breaking the Ice on our lake a couple of weeks ago.(December 2012)
Just got back from lake and had some fun with my son. His Veron Swordsman that I bought from a second hand shop £30.00. Flew the Canadair again against a stunning sunset, and a shot of my Veron Fast Patrol Boat with its new motors (555's) running on 10v A123's, very scale speed but could do with a few more volts to really bring it on the plane.
HI Ian, yes Phil did start from a very young age. I've seen photos of him at the Great West Aerodrome (now Heathrow) with free flight petrol in the 1920's.
If your going to I of W it's worth calling into Westbourne Models on the way that's if your going along the coast.
If your going brushless be warned that the ESC's are a lot of money. I would recommend the Graupner one. I have one and cannot fault it. its a bit strange to program at first but once I got use to it no probs. You can have it for planes, cars, helicopters or boats, it changes the start up differently, I had nothing but trouble with some cheap ones until I went to Westbourne emptied my wallet and put it in my Huntsman by Precedent, the slow speed is fantastic you have so much control and when you open it up it is smooth. I put a water jacket on it and it is always cool no matter how I drive the boat. if you do go to Westbourne let me know, if you like, and you could come in for a drink (tea!) would like to meet you,
speak to you soon, Brian
BRAVO ZULU! The boats great & the figures ice the cake!
BTW- POPEYE IS A US COAST GUARDSMAN-
SEMPER PARATUS/PARATUS GERERE
HAVE A SAFE RC BOATING DAY!
GOD BLESS AMERICA
Amelie is a 1:24 scale pilot cutter from the TV series the hungry sailors, scratch built from photographs of internet, lovely evening sail on bala lake.
MY 34 inch and 46 inch Aerokits Fireboats are readied for the lake. The 46 inch is covered elsewhere in the gallery but the 34 inch was recovered a couple of years ago from a hulk and fitted with a 220 watt 1050 kv bruhless motor. With a 10.8 NiMH and 40mm 3 blade brass prop it looks great on the water.
Deans do a range of raf launches under their fast launches section. They do a 1/24th fire boat within this for about A£120. I built one of these a couple of years ago. Not the best quality kit in the world but with some skill and rework makes a good model. I put a 18owatt 1100 kv brushless od 7. 2 volts and a 35mm x prop in mine and it flies. Let me know if you need any info on these boats.
HI Tom,
Hope you are well. Finally got my boat on the water at the weekend (Fleetwood Scale & Power weekend) and I was quite pleased with things, however it does keep blowing fuses so I will re-wire and see if that helps other wise I am flumoxed.
I am considering converting it to 2 props though to be more true to the original boats and wondered if you had any tips and internal/external pictures of your 46 for me to look at.
Many thanks again Tom.
Dean
This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.
I'll get some pictures when I next see it as it is kept at my Mums place in the NE where the lake at the Tynemouth club is big enough to take it given its speed and size. if you are blowing fuses, make sure you haven't over greased the shaft. I did that once and really only a light greasing of the inner shaft and some light oil on the bearings is all that is required. Also try a smaller prop. You may not get any reduction in Speer as the motor may rev faster and at lower amps. I've just taken the 50mm 3 blade brass props off mine and put 45mm 2 blade plastic racing props on and she runs faster and smoother. Hope this helps.
Bought off ebay, where else! Had been started as a cruiser, with one very small electric motor,then put in a loft for goodness knows how many years.Replaced prop shaft with 2, 40mm r/h and l/h props, 2x 540 motors running through 40a esc.Radio is 27mhz. 2ch. would like to swap to 2ghz to get rid of the unsightly aerial! I am awaiting some plasticard windows to Improve the looks and will slowly add fittings as and when.I tend to sail it every now and again on the boating lake in BUXTON, no-one has shouted as yet,though I'm not sure the swans approve.!: The photo on the water was just as the power was running down, none as yet at speed.It is very manoeverable with the twin rudders,almost on the gunwhales at speed.
HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf
HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.
