Thought that some updated photos were in order this boat is now running on a 3 cell 11.1 volt 5100mAH Lipo no ballast and a 40mm brass prop at Cwmbran 30/05/2012

At last I have a Fairey Huntsman (34 inch) that appears to work, The photos are of it last Sunday at Cwmbran it needs a little extra ballast at the rear but once added it should be OK. it's running a Johnson 600 through a Graupner 3:1 gearbox at 9.6V with a 50mm brass prop, I may also try dropping the prop to 40 or 45 on the next trials.

MY 34 inch and 46 inch Aerokits Fireboats are readied for the lake. The 46 inch is covered elsewhere in the gallery but the 34 inch was recovered a couple of years ago from a hulk and fitted with a 220 watt 1050 kv bruhless motor. With a 10.8 NiMH and 40mm 3 blade brass prop it looks great on the water.

Just a few more pics of ML1302, rudders and A frames are home made and scale brass props are used.

HI " I thought I would put my biggest model from my collection for all to look at ! HMS Avenger took approx 3 years to build . " She is a type 21 frigate at 1/64 scale . At 6 feet long . Scratch built on a fibreglass hull from plywood plastic card & metal parts . Works on a six channel futaba skysport .
Full working red & white leds on deck and cabin , lynxs helicopter with working rotor blades with landing lights. Working radars, bofor gun , A ships whooping sound . Runs on two speed 700 motors off a 12volt gel sell battery which give a good 1hr sailling time . Controlled by a 50 amp speed controller with two brass propshafts behind good size rudders which give a excellant turn .
My model HMS Avenger is a copy from the real ship in which took part in the Falklands war in 1982. Painted in the same grey with a green deck . She looks great on display or on the water . Avenger gets a lot of interest from the general public . please enjoy looking at the photos shown at Sheringham & Eaton park Norwich Norfolk .
" thank you .. A Prestney

HI Fellow enthusiasts
The first photo shows the boat as it was bought from an E Bay auction in late February for the price of 14.50, for that price I had to bid on it, even thought I had a new kit of the same model on order from a model shop from the end of December, before VAT went up. The models turned out to be the 4 feet versions some 11 inch wide and now is about 19 inch high. This model turned up several days before the new kit turned up, and was a bit worse for ware than anticipated as the deck had started to part company from the hull. After stripping the deck of all remaining deck furniture the deck was re laminated to the hull, prop shafts and rudder tubes also refitted using plenty of resin and cloth. A rubbing strip was fitted around the deck hull line to tidy up the visible damage. When I was happy with repairs the hull and deck was rubbed down and sprayed. Using the information in the new kit and some photos of actual boats, MJB's (My junk boxes) supplied all the required parts to scratch build 90% of the models fittings as seen, this includes the figures on the deck. These being obtained off an EBay site as 1/24 unpainted train scene figures that required some or may be a lot of adjustments to their appearance. Several items have still to be made and fitted. As I'm working on her sister boat P147, will make extra parts in one go.
The boat has twin electric drives, the motors, MFA 919D series, are fitted with their own 2.5/1 gearboxes and they drive 40 mm three bladed conta rotating brass props. They have independent 15 amp Electonize speed controllers run from two 7.2 volt packs in series. The switching arrangements for lighting has still to be finished off. Don't know if I'll fit a sound system as the boat is for my grandson.
The boat has had several trips on the Society's water at Cwmbran with myself and my grandson at the helm. it seems to go fast enough for him. (The new boat P147 has been built with triple screws.) Can't wait to see both models on the water together.
Hope you have enjoyed the pictures and information.
Regards
GreyWolf

HI Fellow Enthusiasts
These pictures show my scratch built RAF Air Sea Rescue launch 2507. it was built using my own scaled up planes over the period July 2006 to August 2008. its approx. 4 feet long by 11 inch wide and stands 24 inch high.
The boat has twin Johnson brushed electric drives via 2.5/1 reduction gearboxes with three bladed 40 mm brass props. The speed controllers being 15 amp Electronize supplied from 4.5 amp D cells made into a 12 volt battery pack.
The boat sound system consists of a Diesel sound generator and machine guns being fired by an electronic ring counter circuit that allows the guns to fire individually or together depending on their selection via a diode network. The unit is switched on and off via a Electonize switch unit that also switches the boats lighting system on and off.
All the special fixtures required for this model being self made this includes the figures found on and in the boat. The basic figures are usually obtained from car boot sales or the local ÂA£ shop for next to nothing and then modified to the model boats requirements.
Launch 2507 was commanded by F/O W. Garret who reputedly made the most northerly pick up on the 26th June 1944 for the crew of a downed Catalina, for this action he was awarded a M.B.E. The Catalina pilot F/Lt. Horner R.C.A.F. died of exposure and was awarded a posthumous V.C.
I hope you enjoyed the pics and information.
Regards
GreyWolf

HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf

bought this 50inch hull off ebay and thought I would try a make a boat just with my own idears and this is how it turned out,powered by a 720bb motor,12inch propshaft and a 60mm 3 blade brass propellor.all built from odd bits of wood in my shed. installed wood in bottom and then filled with a two part epoxy resin

twin robbe direckt motors with brass 40mm prop's. 12v battery 10 a/hr.

I have rebuilt this from a damaged ex IC model. Borrowed a plan from a club member and managed to reconstruct the missing bits. Originally used a fast electric car type brush motor with 7.2 v nicads. Worked ok but nothing spectacular. Recently ventured into brushless and LiPo. Tried an inrunner but ran far to hot and not veryt fast. Changed to an Outrunner (mork torky apparently) and nearly took off! (it is a seaplane tender but should stay on the water!) The LiPo is 11.1v 2800MaH. I use a Graupner Ultramat 16 charger, don't use other than a dedicated LiPo charger and ESC. Battery misuse can result in pyrotechnics, so beware. initialyy tried a two blade racing prop but have changed this to a 29mm 3 blade brass prop to slow down the speed. I have also added more lead and will advise the final weight once I have tried the model on water. I sail with Crewe and District MBC at Boundary Park, Nr Knutsford in Cheshire.

Hi,
I thought that my recently finished MTB may be of interest.
It consists of 49" GRP hull ply deck / superstructure. The fittings are from a mixture of ABS and metal, to give a good surface for spray painted finish.
The drive consists of twin 850 motors and twin 50mm brass props, controlled by a JetI Navy 600 on 10 cells, this setup gives excellent scale planing, but with 14 cells the performance is outstanding. I use 4600 capacity and only select the top power run in short bursts, which gives me around 20 minutes duration on one charge.
radio is 2,4 ghz so no bother waiting for a free freq.
hope you enjoy
loz.