On the weekend spotted a yard sale . The older gentleman had restored a model he had built but the cat got to it . So because of his age he had decided to no longer have a hobby . We talk about model boats & stuff & he gave the wood to me & the 3 models . Future Build blog projects Maybe but wood is always handy to have in case power goes out.

Was asked for more info . So here are a few photos . This mini humidifier uses water only to generate fake smoke no smelly baby oil & varsol odor 50%-50% mix for Graupner smokers .I get the power to run unit from the receiver battery port as the unit uses a USD port to make it work so I got a old servo & cut the wire off it removed the signal white wire & used the black & red wires to power up unit . I have to turn model on then power up the Humidifier to start fake smoke put the cabin on model & away we go. Make sure Positive & Negative are put in proper receiver slots Please don't damage receiver if it's plugged in wrong.

Here is another model that was unfinished the I picked up for $10.00 Canadian last year got the model from a member of Confederation Marine Modelers . The Zwarte Zee is 30 inch's in length & is R/C .I forgot to do a build log on the model. If the wind is low I'll be running the model at Boats in the park this weekend at Hamilton's Steam Museum I did do a build log on model

A few years back one of the TV stations in the Tampa Bay area sent a professional media crew out to record one of our meets. I got a copy of the finished video (permission granted by the TV station for reproducing). It is quite uplifting and shows you what model boating in Florida looks like.
I hope you enjoy it!
Lew
Florida 😎, USA❤️

These were taken by a fellow club member, who obviously has a keen eye for photography.

Maiden Voyage for "Dinghy Dan" - Allways up for a challenge, Buxton Model Boat Club member Graham Royle now brings us "Dan, Dan the Dinghy Man".
See Links below Grahams - Clinker built sailing dinghy blog :-
https://model-boats.com/blogs/135864
#bmbc #modelboats #buxton #kayakkate #bill&ben #dinghydan #rcsailing

The new kid on the block appears here in Buxton, curtesy of "Model Boats Website" member Graham93
ALSO - CLICK HERE > below for the "build BLOG" and the Buxton MBC Website. https://model-boats.com/blogs/135864
https://buxtonmodelboatclub.co.uk/
Watch out for more adventures from Graham`s family :- #dinghydan #bill&ben #kayakkate

This tug is large enough to mount a iPhone inside the bridge. Footage was however done with a phone mounted in front of the bridge.
The various models you see was for the so-called Annual Record Day where the idea is to see how many boats can be in the dam. As you can see, very few actually run, and some only have a little toe in the water.
There was 122 "models" that day in 2022 setting a "new" record.
In 2023 nothing was organised and in 2024, the "record" was 75.

This was one of our first attempts to use video editing software. We now use Capcut and Audacity to create soundtracks, voice overs, model SFX etc.

The best part was a previous shoot in slow motion. Video was too blurred but it still looks kinda cool

Filming and sailing at the same time is a bit of a challenge so we mount cameras on the models.
You can follow our channel here:
https://www.youtube.com/@capetownmodelboatclub8570

Was invited to take my restored 1970s 12ft racing yacht (red and white one-93 at 1:3) down to put in the display this afternoon, at the Viaduct Event Center In Auckland, and decided to get some pics of the boats on and off water before the crowds come over the next 3 days. Lots of beautiful restored yachts and launches, as well as smaller racing and sailing dinghies. A couple of NZ designed and built Chris Craft copies inside as well. Also steam launches and a few models.

The boat at 1:54 and 3:12 does not have the usual V8 as you would expect, but has a 4 cyl Mercruiser motor, not as the drive motor, but as a generator running 3 high output alternators powering an electrical system for twin electric motors, (round black objects seen in pic, in front of petrol motor). Shafts run each side of petrol motor, Has large control boards on each side for each motor. Boat and laminated wooden trailer designed and built by the owner, Took 2000hrs to build,- absolutely immaculate workmanship.
Also a short vid on an Auckland ferry trip I took while waiting for the liner Queen Victoria to
depart
JB

As far as I know, there is not a model boat club at Madrid. However, modellers gather Sundays at 10:30 to sail at a pond -actually a set of four connected ponds-, located in a municipal park, in the south of the city. Access is free.
The boat in the video is a sidewheeler, scratch built by my good friend Eduardo Yraola, who is a far more accomplished modeller than I am. She has steam propulsion, and sails at a majestuous pace.