Built in 1970's by a modeller who died and sold on by his son a great boat that takes a bit of sailing. Not sure if a kit or scratch built and hopeing someone on here will know.

I don't know if this is of interest to other modellers, but I was trawling through Ebay's wares when I found this supplier and, on a whim, decided to once again try my hand at using etched brass parts. As you might see, not exactly the biggest of fittings, but they really test the patience and skill.
Also in one of the photos is the brass bending tool I use and the supplier can be found at http://stores.ebay.co.uk/models-parts-shop?_trksid=p2047675.l2563

Dave W
I hope this helps if not let me know & I will take more pictures
i was able to put a high deck in because of the size of the hull
it might be difficult to do this with the smaller hull take a look on SLEC they do the River Police Launch (last picture)it appears to to be risen at the front to take the motor etc

The Vintage Model Boat range are now being produced by SLEC Ltd. All our kits come with all parts cut by CNC router or laser, plus all the necesary strip wood is included, along with building instructions and plan.

The River Police Launch has been based on the old Veron Kit from the 1960's that we all loved at that time. The model is not a scale model but embraces the boat design of that era. The kit is now fully laser cut so all parts are pre-cut and most of the parts are now made out of high quality ply, so obtaining a good finish is easier to achieve. The model can be powered by a 7.2 volts standard buggy battery pack or ic power of .5-1.5 cc engines which is not in the kit, also we have not included any running fittings as we feel a lot of modellers will have or would like to choose for themselves, but we can supply these fittings if required.

The Strathclyde University sponsored a modellers competition to encourage school pupils to design an R/C model yacht. When Graham Bantock the noted designer - visited the event to give prizes, he decided to design a boat of his own and WEE NIP, this boat was born.

Won this through a Marine Modeller's competition, in 2011 I think. Turned out to be solid ready to run boat, ESC threw its hand in though, but took opportunity to replace it and update receiver to 2.4Ghz. Taken a few hard knocks but apart from minor damage to railings still going strong. You May want to turn volume down as ducks and geese were in full song whilst sailing her at Ethrow Park :-)

J. R. MORE - LAST OF THE LARGEST STEAM TUGS BUILT ON THE CLYDE. The best looking tugs ever built!

This model is scratch build at 1:48 scale of the SAR&H Durban tug J. R. More, which was the last large steam tug built on the Clyde in 1962.
It took over 2 years to complete this model, which was my first scratch build from the modified plans of a sister tug called the F.C Sturrock, which was also stationed at Durban as the shift tug for that harbour. Other tugs of the class were also stationed at Port Elizabeth and Cape Town.

The J. R. More was the newer day tug in Durban, most often used to service the Union Castle ships and others in, out of Durban and remembered by so many visitors to South Africa of that time.

This model tug on the water has differential motor control, software linked with the rudder, can go about on the spot and a delight to sail as a model, capable of 6 or more hours on the water. Working Rotating Radar, lights and woop-woop sounder as per the original tug. I would also like to install the Telegraph bells, however these would drive fellow modellers to distraction, as they were a very distinctive sound and very regular, Implanted and well remembered by the crews and those in and around the harbour, even today. The engines on the other hand were almost quiet and by all accounts very reliable.

This model is ballasted mainly by two 7 Ah 12 Volt SLA Batteries for the main drive motors and a 2 Ah 12 Volt SLA (Aft ballast) for the Lights, Radar and Sound unit. All up weight is 14Kgs and capable of above scale speed from the two MFA 6:1 ratio Geared Motors driving two 4 bladed 70mm screws.

This model has onboard charge regulator circuit, built-in minature dual volt meter to allow quick on-board voltage inspection and single plug-in charge and regulator socket for charging all 3 Batteries together.

The actual full size J. R. More tug still survives and can be visited at the Durban Maritime Museum in Durban, South Africa. Local supporters are undergoing essential repairs, restoration and preservation with private and company financial support.

J R More is the only surviving large steam tug left of this class and as Important to the skills of the Scottish shipbuilders of the Clyde.

Built this year 2012 by Colin Burrows as a static model. Bought from him to make RC on 2.4. and currently fitted with a 600 motor that is too powerful, advise that was received from a fellow modeller, I am awaiting for a smaller unit to arrive to make it more authentic as it resembles a power boat rather than a trawler. Am also building a speed boat but have put out a request for wiring information as I have already blown up one speed controller!! lol.
I belong to a recently formed club sailing on the lake a Queens Park, Mablethorpe, Lincolnshire. New members would be most welcomed.

I acquired this Snowberry in need of some TLC. I found some pictures of a flower class captured by the Germans in France. I used a bit of modellers licence but I think it does represent the ship. it is powered by a MFA 540, 6volt gel cell and ripmax esc. Tx rx 204 gig

HI fellow modellers, Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was scratch built using a fibre glass hull and plan obtained from a fellow modeller at the Bridgend Show in 2007. The front door and some fittings are made from plastic card and tube, decks are from ply and timber. On board figures are from the pound shop and car boot sales, modified by myself. The on board tank and half truck are RTR models that I have modified their looks to fit into a WWII theme for the craft. This craft has twin drive, 400 motors via 2.5/1 gearboxes. I tend to use both sticks on the TX for drive as this allows me to turn the model on a six pence.The dispatch door works from a rotary pot on the TX and via a rotary sail winch servo in the hull. I have just modified my Planet 5 TX to allow me to change my radio gear in this craft. This model has had meny trips on Cwmbran Boating Lake and at shows the society attend during the year. Still haven't allowed the tank or half track to run off the landing craft up the lake side slipway. one day I might get it on video. Hope you enjoyed the photo's. Regards GreyWolf

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.

HI fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built using a Billings Kit, bought for me as a Christmas pressent in 2009. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The steam engine rotates using a stripped down minI servo, fitted under the motor housing on the deck, again linked to the main motor voltage. The two 9.6 volt AA batteries and control gear are mounted under the boats floor, forward locker, a minI servo for steerage is fitted under the rear seat and the receiver is located under the wood pile. Figures are self made from items obtained from the local pound shop. The modal can be seen sailing at Cwmbran Boating Lake or at shows the society visit. Hope you enjoy the pictures, Regards GreyWolf.

I got this from another modeller late in 2010 sailed it at Westport in September. The plan is called HMS Midge but this type of boat were only known by numbers I.e. TB 20. it goes very well on 7.2 volts but needs a bit of ballast in the stern to stop it diving at speed