The boat is a scratch built and started life in the shed. it is a semiscale model at aprox 36inch, built with balsa wood.It is full remote control and fitted with two Mtroniks Vision 600 motors one 12volt 7ah battery,one seasprint esc.
It was built as a fun boat so I could sail with my friend Peter thomas with his variuos boats.
Several things have now been added since this boat was first built, IE smoking stacks, fireing torpedoes and magnetic pickups for colecting them. Also has working radar/moving gun + a home built bec.
Flag poles and flags/compas has been added on the superstructure.
Each motor draws 6amps at full power, I have measured the speed from one point to another at a spacing of 60mtrs, and timed at 15 seconds, but this is a bit fast for this boat as she starts to plane out of the water.
We sail her at New Brighton lake on the wirral most wednesdays. As the weather is now a bit cool I have just purchased a simular model to this at 1:48 scale 110ft island class USCG Patrol boat so I can look at them both in action when the weather picks up. Anyone wanting info can contact me via this website.
Here is a video of our boat (Vigilant star) sailing at New Brighton boat lake on the wirral every Wednesday.
The boat is a semiscale (Coast Guard Cutter), designed by Hal-Harrison in Marine Modelling. I have doubled its size and put two 540/1 Mfa motors in, driving quanta 45mm props. She is 36" length 8" Bow, runs of one 12 volt 7Ah SLA battery.
It is made from Balsa/Fibreglass resin. Runs well no leaks to date. Gerry.
This is a video of my re-make of the Aerokits Sea Queen. Build commenced in the autumn of 2006 and it was to be a winter build project for when the weather was too bad to fly R/C elec planes. The boat was finished mid 2007 and was launched in May.
My closest water to sail on is Lake St Clair, but one slip up and the boat's next stop would be Canada. its seen here sailing in the confines on an ornamental pond in Wahby Park, St Clair Shores, Mi, USA. The music has been added to cover up the sound of fountain just out of picture to the right.
The supplied motor has been replaced with an MFA Torpedo 850 which has substantially more power and 3x the RPM.
A week before the video was taken I lost the prop and its seen here running on a temporary prop while I awaited a replacement. The performance on the video is a little more sedate than normal.
BRAVO ZULU! I CAN RELATE, MY LATE FATHER BUILT RC AIRCRAFT INB THE 60S & 70S. HiS BUDDIES COMMISSIONED HiM TO BUILD THEIR KITS BECAUSE HE HAD A GREAT HABIT OF OVERBUILDING. IF THEY MISSED THE LANDING, THE PLANES WOULD LIVE TO FLY AGAIN! MY DAD WASN'T A GOOD PILOT, SO HE HAD OTHERS FLY HiS AIRPLANES. I BUILD MY BOATS IN SIMILAR FASHION. OVERBUILD!
94 Made from Mike Cummings Kit on first water trial
As promised the power set up is detailed in the special section on that subject. These pictures taken at Silvermere Lake Cobham Surrey show 94 on her maiden voyage. All sytems GO. Grahame Palmer.
no it was built from photos it will be at the new woodvale site this year in southport 28&29 july in southport the small model slipway kit is nice size for a car boot but if you have more space the kitshack the larger one is nice also the slipway one is a formed cabin and hull the kitshack is wood a lot more work but your prefrence good luck micheal
The boat is scratch built,designed by Hal Harrison,contruction plan in Marine Modeling mag.whitch was designed as a freelance coastguard patrol boat .made from balsa/cardboard sise 18" aprox.weight 2.5kg.
Our model is 36"twin motors and all moving parts and weight is 10kg.
This is the latest pictures of Vigilant Star on the lake at NewBrighton Wirral
The black Amsterdam is mine, built in 2004 from the Artesania Latina kit. it is powered by a 545 motor through a pulley reduction drive, and the battery is a 6v, 10ah SLA.
The kit prop was replaced by a brass one. The yellow model belongs to Peter Barlow, a member of our club, and was built several years before mine. it is also an Artesania kit.
Our club, the Ballina RSL Club Marine Modellers, sail in a tidal salt water lake in Ballina, which is on the far north coast of NSW, Australia.
Peter Fitness.
Hi, I have just acquired one of these tug boats. it is in need of some restoration. Do you know of any where I can get a copy of plans for this model please. I have been in touch with the manufactures and they basically said they have nothing for this Amsterdam model so it looks like it is going to be a job and half to restore it but it will be done.
Name of the Boat is the OCEANIC. This boat was in my friends garage for 18 years, when I was given it, it needed some T.L.C. the kit from what I can gather was late 60s.
I had to send a way to Germany to get the plans so I could refurbish it, and some of the bits I had to make myself. it is powered by twin monoperm super 5 motors. it has rotating radar, working mast lights, and bow thrusters. Sailed at Cheddar Steam Modals lake.
Really nice model I did see this kit for sale about three years back on fleebay.It was along with the Calypso which I was keen to buy and did successfully get for £150 ,The other boat from the same seller was the Oceanic, which I later wished I had also bid for sold also for £150 ..Your model does look superb
The Sea Queen is an original Aerokits kit from the early 1960's. it was built by my Dad in the early 1960's. it was originally fitted with an ED Seaotter, next it had a Channel island Special, then a 15cc Gannett and finally fitted with the OS 80 which it still has fitted today.
I sail at King Lear Lake at Watermead County Park in Wanlip Leicestershire. it sat in my attic for 22 years and 2 years ago I dragged it out and gave it a bit of TLC and started to use it again and it has been ran most weekends for the last 2 years.
I ran this boat virtually all day of the Burton Model Boat Club's Fireboat day in September 2006. it is currently in dry dock having a full de-barnacle and repaint.
"BOO BOO Kitty" is a scale model of a Crosby designed Cape Cod Cat Boat.[USA] it was built from scratch at a scale of 9.04" = 1"; the model being 26.5" oal.
The dimensions were taken from a book that highly detailed the building of a real Cat Boat.
The hull is plank-on-frame with epoxy and glass cloth as the final surface. A separate and detachable fin keel was used for sailing of the centerboard model.
Radio controls were a Hitec sail winch [HS-785HB] and one servo for the rudder with a 2 channel JR transmitter.
Copying the book plans, scaling them down, and construction took up the winter of 2006/2007. The model is sailing better than anticipated on a local lake in Langhorne, Pennsylvania.
