I have just completed my Puffer and am quite pleased with the outcome. The components are quite good but do need a bit of fettling but this is what our hobby is about. This is my third Caldercraft build so I am used to their quality and sparse instructions.   As usual for Caldercraft you need to have your thinking cap on as the A0 plan and the 'instruction book' do not match up but of course they do expect you to have a little bit of experience in model building. it has taken me about 6 months to build working on and off over this time. it has a large hull which is easy to house the motor, ESC, RC and batteries, etc. (I installed 2 lead acid 6 volt batteries, one on each side amidships) which gives stability and ballast. Being a large deep hull it needs a lot of ballast, even in its short length.I have only tested her in the big white nautical test facility at home so do not know how it will perform on our lake but hope to try it out on Sunday if the weather is set fair. Tried her out Wednesday and she sailed really well - maybe a little more ballast in the bow but not too concerned.

Purchased from an old collector. Not sure how old, I was wondering on how do I clean this ship without damaging it. Quite a nice model. I was also wondering if anyone had any ideas of what kind of ship this maybe.

Nov.1 2016 weather great for Nov. here in Burlington Ontario at Spencer's boat pond . I'v posted a build log on this Midwest model but never showed it on water

Hi

Back in the early/mid '70's I took a pilgrimage aboard Manxman from Llandudno to Douglas on a day trip. I took a number of on-board photos which these are some. I intended to make a model of her but so far have not succeeded! but that is nothing new. I enjoy the planning and thinking about it! Anyway, if you would like more, please let me know.
Edward

Recently built from an Aeronaut kit, this is a 1/24th scale Pilot Boat based on a German design. Powered by two 540 brushed motors with 3 bladed brass props it attains something like scale speed. The colour is Volkswagen Bright Orange, courtesy of Halfords and the non-slip deck is acrylic green mixed with silver sand then covered with a silk finish varnish.
The boat was filmed at an illuminated regatta staged by Bournville Model Yacht and Power Boat Club on their lake in Bournville, Birmingham
%u2003

Return to building model boats after 45 years and first with R/C.
Fine kit by Mountfleet, though white metal castings getting a bit tired. Don't take it out sailing very often as it takes a lot of lead which I load each time. Quite a handful to launch. Sails well though.

Enjoyed making this superb kit from model slipway. Having to cut out the polystyrene sheets proved to be no problem. With 2 motors and bow thruster, thought it would be good for the steering competitions, but its a bit wide in the beam for our rather tight course. Working searchlight and rotating radar.

Nostalgia build from New Maquettes kit. Needed a lot of extra work on fittings as kit a bit limited. Not bad for steering competitions with WA model ship club.

Built this year from excellent Metcalfe mouldings kit. R/C sailed with Australian model ship club. Tried it for steering competitions but not that manoeuvrable. Boat of the yr 3rd prize!

Hi,
this is my last model, thames siling barge on its maiden voyage,October 2, 2016. Preparation for construction of barges - Fall 2013. I have not chosen according to what plans I will build. I bought plans for TSB Lady Daphne, finally I chose but I have other plans.
On the internet I found an information plan barge "Champion class" from H.I.Chapelle. Even though I had prepared and cut out the ribs on the LD (1:28, Loa 98 cm), I finally began to build a "Champion". Loa 110 cm.
More photos and a description to> http://barge.homeunix.org/index.php/home <
It still remains to be done many details - winches, dinghy, and more. Also, set the the sails just sewn just for a test.Everything I wanted to finish through the winter
Tom

This is my replica model of the Sirius Star designed by Max Coote of Ripmax, around 1954.
I found the drawings on the internet, and built the model from scratch. The boat is 41" and I have fitted an electric motor taken from a childs ride on car, 50 amp Chinese controller, 50mm prop, and 12 volt 7 amp lead acid battery.
It also has a Murco diesel fitted in the wheel house to give the boat a 50's appearance!
Sea trials soon!

Hi i acquire this Admiral Barge some time be for the summer it needed a lot of work to be done I believe the model was built in 1950s .In pic 1 that's the condition she was in when i got her .The hull was in perfect condition under the paint work I replace the back deck and the deck in the middle where 2.5cc diesel engine goes in and now its all electric .in pic 2 is the finished project in perfect working condition .