Decided to sail the Solent so took some video to share. Uses 2 Bhuler 12v brushed motors with 4 bladed 45mm PropShop props and 12v 12AHr SLA. Twin Electronize ESCs. Radio is Futaba 6Ex but I will probably change to the Taranis so I can get better control using some bespoke Tx settings to co-ordinate the props and rudder.
Lifeboat crewe had been on a night out so not quite vertical. Aplogies for the shaky video, it's difficult to sail and video at the same time.
very nice boat and yes it is difficult to video and sail at the same time ! try to get someone else to steer while you video !! using a tripod is best. Les Breame
Thanks for your feedback.
I was using a monopod so I could pan and follow the model. I agree the tripod works much better. All my fellow sailors were otherwise engaged unfortunately.
Dave
Hi and welcome to the site.
If you are considering using an IC in the model I suggest you find a local club or water where you can sail. Many local authority waters prohibit IC engines.
I see you recently asked for details of a club in Torquay and note that we do have a club registered (Model Boat Clubs) as Torbay and District MBC. You could try sending a pm to one of the members registered as sailing there and ask for details.
Good looking crew!
Dave
I built this one from a Caldercraft kit and powered it with a twin screw steam engine
Model has steam horn sound together with bilge pump and fully equipped lighting system
Have extensively weathered the model to create realism to imitate what it probably looked like after many years steaming and working round the world in the 1930's
A smoke generator has also been fitted which together with the twin screw steam engine gives a realistic look when on the water
Basically scratch Built except for the hull supplied by Fleetscale
Scale 1:48
Canadian Corvette and powered by single screw Saito steam engine
Lighting throughout with bilge pump and Asdic sound system
Sails scale speed beautifully with smoke generator adding realism
To steam power
Lorraine is an ongoing build, started this year ( 2016 ).
Building from plans MM 512 ( MBPS ).
Hoping to be a twin screw powered hull.
And sail on the local pond at County Hall in Worcester.
Keel and Bulkheads are in 5mm Ply, and plank on frame in Obechie 6mm x 3mm..
Now that I done skegness lifeboat day I can get on to finish what needs to be done & hopefully before Xmas I can have her on the water,the crew at skegness loved the model as a whole and even the mayor of skegness liked it,but now time to get down to the nitty gritty and get her ready for the water.
Kit [Robbe] I didn't built it myself. I removed the motor and screw. So the only power is wind power. And I've equipped the boat with a sailor and a flag. When zoom in on the last picture, you see that he is also provided with a crate of beer.
I just noticed you have working anchor chains, great job! I wish their was a pond near by you could go to! I guess you are stuck to the bath tub like me too!
This model took me 3 years. Copper plated the hull panel by panel. Even found a crew for her, then added an RC and took her to the lake.
She sailed well, but my enthusiasm to leave the gun ports open cost me dear. The water got in the hull and knocked out the RC, leaving her listing and drifting some way from shore.
Salvation came in the shape of a 10 year son of a friend, who strip to his underwear and swam out to rescue her!
Now she sits retired in a glass case.
You should have modeled either Wassa or Mary Rose! They both made the same mistake!
If you don't want to close your gunports, give her some flotation balloons below deck. Shame to have such a beautiful model as display only.
I was using a monopod so I could pan and follow the model. I agree the tripod works much better. All my fellow sailors were otherwise engaged unfortunately.
Dave