the latest to add to my fleet,a Rother and A Waveney,both 1/12 scale.pics taken at Cwnbral model show.All were on show,with my Arun ,Solent and thr Rother being sailed on the day

free down load plan of swordsman scratch built looking for more plans Iam a new boy at 74 years old to model boat building so find your web site help full . larry

This is my second attempt at scratch building using a a grp hull. My first boat was an MTB/MGB built on a Perkasa hull as a semi-scale model. (see All things Rc - Power setups).
This time I have concentrated on keeping things lighter but it still weighs in at 2.5kg!
I have built without plans, relying on internet photos scaled etc using "Photo deluxe" and "Photo Express".
Virtually everything is built from plasticard apart from a 3mm liteply deck.
The dinghy is epoxy resin and microballoons, ths scramble nets are Lego!
Power is again courtesy of Graupner -2, Speed 600 8.4v using lh. and r.h 35mm props. Esc is one of those 50amp ones from the far east. These are far cheaper than the Viper Marine 40 used in my MGB, but slightly heavier and less sensitive at low speeds. Current drain (in the bath!) is up to 30A but this gives a superb on the water pace of an, estimated,8mph. Battery is a 4,600 mAhr NiMh.
(A true scale speed approaching 150mph plus).
I sail it on Ullswater in the Lake district and the Vosper Perkasa type hull shape is superb in the real waves that we get there, flying over the crests and taking aboard No water!
It really looks the part as my photos would show if I could learn how to load more than one! Can anybody help with this?

These two boats were refurbished by Kalamunda. The first is a Lesro Sportsman and the second a NorStar Wave Rider. The Sportsman has a Graupner 700 on 8.6v and the WaveRider a brushless motor. The on board camera was arranged by Kalamunda and other video shot by Ianed57. The water is at Crealy, Exeter, the home of Exeter and District Model Boat Club.

Just a short video of dbninja, stormin and myself (Fireboat) at Southport Model Boat Lake this Sunday.

Just completed , not exactly origonal but not too far out. On the pond for the first time today after a rebuld, and very happy with it I am. Graupner kit, Don't know the builder, but when bought it was yellow! it just had to be put back to red. I didn't like the green deck, so it became mid-grey (gloss rubbed down to semi-mat). Powered by 3 Graupner 500 motors. Working radar and lights (worked from a key-fob, not transmitter). Sailed at inverleith Pond, Edinburgh. Home of Edinburgh Model Boat Club.

whch is real and which is the model ? Confused , looks like the real thing (and the plane flies ! !)

I have rebuilt this from a damaged ex IC model. Borrowed a plan from a club member and managed to reconstruct the missing bits. Originally used a fast electric car type brush motor with 7.2 v nicads. Worked ok but nothing spectacular. Recently ventured into brushless and LiPo. Tried an inrunner but ran far to hot and not veryt fast. Changed to an Outrunner (mork torky apparently) and nearly took off! (it is a seaplane tender but should stay on the water!) The LiPo is 11.1v 2800MaH. I use a Graupner Ultramat 16 charger, don't use other than a dedicated LiPo charger and ESC. Battery misuse can result in pyrotechnics, so beware. initialyy tried a two blade racing prop but have changed this to a 29mm 3 blade brass prop to slow down the speed. I have also added more lead and will advise the final weight once I have tried the model on water. I sail with Crewe and District MBC at Boundary Park, Nr Knutsford in Cheshire.

Scratch-built paddler by Pete Smith. Model was built fom Richard Webb's MAP plans and electrically powered. Pete added a redundant IOM keel cut down to provide extra stability and the boat now performs very well having suffered the vices of most model paddle steamers. The boat is 54 1/2 ins long and 13 1/2 ins beam, plank on frame construction.

Scoter was built from a Dumas kit ordered from America. it is a planked hard-chine boat reperesenting an East Coast fishing cruiser, She is 2 feet long with a Graupner Speed 500 motor running on 7.2 volts through an MTroniks 10A ESC. The crew are from George Turner Models, 1:12 scale resin figures.

This is the model seen in the video of Dunlin but now electric powered. Gave her a repaint which involved stripping right back to bare wood as the original finish was crazed due to a reaction. Finall got fed up with it and bit the bullet.

HI all. This is an, RAF Fire Tender 32" that was given to me 30+ years ago by a friend who was going to scrap it. it's been stored in my garage loft all this time. I am about to start the restoration of the boat but havn't done any modelling since I was a youngster.
It has no running gear but was originally powered by a nitro engine, I am hoping to convert it to electric power, the problem is I have no idea what type of motor to use or what length prop tube or prop sahft is required, I don't have any drawings or information about the boat. I am presently cleaning and rubbing the panels down so that I can re glue most of the joints as thay are mostly starting to come loose.
Will post some more photos as I progress.