This slide show shows the build and final result of my scratch built Seaplane Tender. it is 1/12th scale and powered by 2 x 250 watt brushless motors. Built in 2011, it sails at Knightcote in Warwickshire and Tynemouth in the NE.

Model Slipways 1/32 scale harbour tug kit built late summer/autumn 2011. Powered by MFA 2.5:1 geared motors running on 6 volts and powered through an Action P94 Mixer/speed controller to provide great steering performance -- easily turns on it own axis. Sails mostly at Knightcote Model Boat club

Model Slipways kit with fire monitors and bow thrusters. Powered by 2 x MFA 2.5 : 1 motors on 6 volts via Action P94 mixer ESCs. Sails mostly at Tynemouth model Boat Club

Hi" I thought I would put my new rebuild on for all to see ! I found this old Marblehead yacht as a wreck. She was gathering dust in an old reclaim ferniture wherehouse whilst we were on holiday last summer. Been told the yacht had been originaly scratch built in 1950s from a plan. She took me about half a year to rebuild. New parts as follow hiteck sail arm winch with 18lbs of torque. New futaba servo for the rudder. New sails & booms rigs & fittings. New deck made from plank strip wood & varnished. Also finished in painted Ivery white. She sail well in lite to strong winds At my local boating lake at Sheringham Norfolk .
works well on a Spekrum DX5E But can work on any other 2 channal transmitter .
Hope you enjoy the photos .

here my matchbox flower class corvette, como motor driving through gear box, hitech esp, 7.2volt 1200mah power pack.
looks good and sails well have weathered her to look authentic not prestine like my crash tender, range safety launch and arun lifeboat

Thames Fire Service fire boat,this has twin 540 motors,12v pumps(not working yet) and nav lights.Fibreglass hull with wood decks etc.
The model is quite old and has been a static for some time until it fell into my hands,the name Gamma on the bow.
Looks pretty much scratch built and a very good job whoever did it.
Sails occasionally at Gang Werily Fawley Hants.
This is another work in progress,hopefully we will make it to a fun-day maybe next year.

This Sea Comander was another disaster, rescued from fleabay a couple of years ago as a 50s/60s bare shell. Whilst the hull was basically sound, the model needed considerable surgery. I resisted the temptation to cover it in modern fittings and have kept it original looking. Power is an electric 800 motor on 12 volts with 2 channel 27Mhz R/C. Performance is reasonable, particularly as I have lightened the original internal structure considerably. A big 7AH battery lasts for ages but for speed I use a small 2.5AH one. Owner sails at Warminster Model Boat Club, Wiltshire.

this model has been extended by 2 inches for better handling looks the part powered by a single Graupner speed 600 on 8.4 volts built from liteply weighs 4 pounds all up,built 2004 and sails at the Goole club waters near the coal hoist ,Goole docks (saturday afternoons)

Scratch built SDM MkII tug 1/48 scale.

Hull started out as polystyrene foam and plywood. Started July 29,2006 and in the water by Aug. 11th for sea trials. Detailed over the following 18 months.

The model is powered by 12vdc using Graupner Speed400-2.33:1 gear drive, and the small Graupner Schottel drives #1761. Separate ESC and Steering control for each drive.

The Lighting is 3mm LED cast into clear, or tinted, polyurethane lamps.

It sails the Pacific Northwest, USA, homeport Portland, Oregon.