The Lake Illawong Model Boats club and Task Force 72 Fleet Base Victoria had a combined display at the 2019 Sandown Train and Hobby Show. This video is compiled from the first 2 of the 3 days. We even had a pond erected, but unfortunately a few small leaks restricted its use.

I hadn't built a model of any sort since I was 15 years old and that was a control line aeroplane with a glow worm engine. 45 years later and regressing nicely back to my teenage years, my wife bought me (reluctantly!) a RC Boat Kit - Mowe 2. I had been wanting to build again for many years, but children and family and home situation did not allow.
So, over the cold Autumn and Winter Months I carefully put my spare nights to good use, rather than watching night after night TV box sets and re-watching the entire James Bond movies, not once but 2 or 3 times....
Anyhow after 3 months...the finished product. I should have started a blog but didn't know of this site until a few weeks ago.
Not a brilliant finished job, but a satisfying one, and it sails nicely on Bushy Park boating lake in Kingston-upon-Thames.
Now o nto bigger and more complicated things...a Fairey Huntsman 31.
This time I'll do a blog....👍

I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.

Well I had one of these back in the early 1970,s been looking for years for another one must of been a rare boat. So I was surprised when this turned up on eBay last week. So I had to buy it, the seller did not mention that the engine a Merco 35 was locked solid and all the head bolts were missing and the whole inside of the boat was soaked in sticky castor oil exhaust residue, but this is how I like them loft fresh and not messed with. I don’t think it’s hardly been used, I managed to get the engine apart after heating it up with a blow lamp looks like it’s hardly been run but the liner got a fair bit of rust on it so not sure I can use it. The only thing to remove the sticky castor oil was 25% nitro fuel, the one I bought in the 70,s cost me £27 this wreck I bought in 2018 £70 but I will enjoy restoring it, this is the boat as how I got it and now with the engine out that was another nightmare 😁

aero-naut mowe 2 kit. my first rc model boat with a few extras.The kit was ok to build but the prop coupling was a length of silcone tube ? it spun off at the first test run.This was the start of me fitting universal couplings to my boats.The company were being mean using a cheap piece of tube.It runs very quiet and smooth but needed a lot of front end ballast .i made this to try and drag my grandson away from his ipad,phone and the game of fortnite .I tried to get him to help build and run it but to no avail.I now am enjoying a second childhood building boat kits !

My dad built this over a long period of time, starting in the '80s. The hull is fibreglass and the rest is scratch built from plastic card, balsa, ply, wire and anything else he could adapt.
Although he installed the motors, props and rudders he never completed the RC installation or tested it. I inherited his boat models a few years ago and wanted to "finish the job", getting the model on the water. After installing the RC gear and batteries over the last few months, this weekend was the first sailing outside the bath at the Valley Gardens boating lake.
Happy to report that it sailed really nicely, seems to be reasonably stable although I did restrict it to calmer times when the MTBs and faster boats weren't running !
HMS Cadiz was a battle class destroyer, laid down and launched during WW2 although she didn't receive her commission until 1946 so didn't see combat with the Royal Navy, serving with the home fleet. Due to the changeover in pennant numbering she was originally allocated R09 and later, when the admiralty decided to revert to the D for Destroyer pennant numbering she was assigned D79. To reflect this my model has D79 on the starboard side and R09 on the port side.
She was sold to Pakistan in the late '50s, and renamed PNS Khaibar. She was sunk with the loss of nearly all hands in 1971 in the indo-Pakistan war.

Huson 24 RC sailboat wooden hull. I have a small fleet of these. They are extremely stable in high wind. Bought this one online in pretty good condition.
Did a lot of smoothing on the epoxy coated hull. I use West Systems epoxy because it flows so well - like paint - and doesn’t stink.

Hi Model boat enthusiasts,
This is a photo of almost completed 2 model boats I have almost completed. The Sea Queen 50 years old find. it was found in an attic in a kit. The kit was in a very poor state and most of the timberwork had to be glued back together or remade. I had no plans for it and had to source a copy from the Model Boat website. it is a very nice model. The pilot boat was scratch built and sails very nicely. I have been building boats for about 30years and have built over 25 boats, scratch built all of them. I have included photos of some of my boats.

Shots from the Chichester Canal RC Boat Run 2018. A bit of an endurance run and all except my galleon made it. Mine decided to not be attached to the prop shaft after a bit. Several children took part and several of the local clubs were there to enjoy the sunshine and company

CB90 Model boat, 52 inches long performing 360 degree rotation on its own axis.

The Combat Boat 90 (CB90) is a class of fast military assault craft originally developed for the Swedish Navy by Dockstavarvet.

Powered by two 9.6v Graupner 700 turbo motors (no-longer in production).
Two Mtroniks Viper Marine 25 is a Brushed Speed Control designed specifically for use in RC model boats, it has a 25Amp motor limit and has proportional forwards and reverse functions

PT 109 was one of the hundreds of motor torpedo boats (PT) of the PT 103 class completed between 1942 and 1945 by Elco Naval Division of Electric Boat Company at Bayonne, New Jersey. The Elco boats were the largest in size of the three types of PT boats built for U.S. use during World War II. Wooden-hulled, 80 feet long with a 20-foot, 8-inch beam, the Elco PT boats had three 12-cylinder Packard gasoline engines generating a total of 4,500 horsepower for a designed speed of 41 knots. With accommodations for 3 officers and 14 men, the crew varied from 12 to 14. its full-load displacement was 56 tons. Early Elco boats had two 20mm guns, four .50-caliber machine guns, and two or four 21-inch torpedo tubes. Some of them carried depth charges or mine racks. Later boats mounted one 40mm gun and four torpedo launching racks. Many boats received ad-hoc refits at advanced bases, mounting such light guns as Army Air Forces 37mm aircraft guns and even Japanese 23mm guns. Some PTs later received rocket launchers.

This Proboat PT 109 model was brought in 2013 for £100 these boats are rare now, This one had a few faults with the propshafts they were bent and noisy both were replaced, with quality 4mm shafts, motors twin 600s were also replaced by Graupner versions along with mounts and couplings, basically all the running gear, also two ESCs by Aquapower were added and a 2.4G RC system.