Search
454 posts for “tug” · in Blogs
Page 8 of 17
Blog
Tugboat Serenity
I used over 25 clips to hold the hull together, also everything is just positioned as I was not sure if I wanted to use the Original design of the JERSEY CITY! I wanted something different so as I put her together I started Improving, makin …
Blog
Jervis Titan Tug model with a job
Boat has been In the water. Speed seems good, still a bit high In the water, but that run was without the house or rubber bumper an that alone Is 6.5 lbs. overall weight looks to be 60 lbs, but I still have hardware to add to hold the house …
Blog
Oceanic Tug
A couple of years ago a colleague gave me a rather beat up model of the Oceanic. It Is from HegI modellbau kit. I am about to refurbish this model and I will provide updates as I proceed.
Blog
Tug restoration
I'm pleased with the results so far, working lights fitted so far:lower cabin,main mast,towing rear mast companion ways and 3 home-made deck flood lights (all led's) and I have test run the model on 6volt lead acid batteries and like the am …
Blog
A Cullermix tug conversion
Here she Is ready for trials now with the before and after pictures added.
Blog
A Cullrmix tug conversion
Next came the new bulwarks all round, these were made from 1.5 mm ply wood
Blog
A Cullermix tug conversion
The next job was to start to make the new casing to the correct size and shapes, the funnel is the old one used for effect this was later binned and a new funnel made .
Blog
WWII RESCUE TUG ASSURANCE CLASS
Another part done which Is the engine room cover and the rear hold, hope to have a fine day to be able to spray all the sections (Some hope LOL)
Blog
WWII Assurance Class Rescue Tug
I have now built the funnel which took a few days to get right, both top and bottom White metel sections glued Into position. Then getting the pipework done and put Into place seemed to take forever but got their In the end, now only have t …
Blog
WWII RESCUE TUG ASSURANCE CLASS
This is a kit which l will be making over the period of the winter. Its a 1:43 Scale Length o/a: 1108mm Beam o/a: 248mm Displacement. approx. 11.5kg
Blog
"Aziz" Tug
Just got back from "The Dockyard Model Shop" In Chatham Docks and started the build on this model from Model slipway Its 1-50 scale (1105mm long) and has all the parts needed for compleation. The hull Is fibreglass and most of the superstru …
Blog
Tug from a fleet tender kit
the next job was to sort out a working towing winch for this I have used a Robbe unit with a geared motor, she Is ftted with two caldercraft 900 size motors and direct drive to 70mm props the motors turn a 3,000 rpm. the rest of the build a …
Blog
The Katra a Thames craft tug
Well she Is completed now, and has had her Indoor test tank trials all worked well, she Is now ready for the lake . The end. look out for the next one.
Blog
Sea going Tug
For those who are intrested I have added more photos of what stage I'm up too.. I have fitted the Kort Nozzles and motors are in place "which was a tight spot" The deck is coming along nicely. I've been playing around with the superstructer …
Blog
Sea Going Anchor Tug
It's been a little while between builds but I will explain what I have done with the deck and cabin. The windows on the cabin were cutout In one big section on each side and I made stripes using plywood and glued back In place making them l …
Blog
Robbe Antje…started in the 80s!!
… ood power on 2 lipo cells, and is not too fast, perfect for tugs and workboats. The G connector servo has been removed. My intention is to get everything under deck done, wiring, etc and a ballast check done with the deck laid, but not glue …
Blog
MMM Lady "T"
… time back in the mid-90s, and on the MMM stand was a steam tug that I thought was the Perseverance (hull in my loft). As it happened, it was the Lady “T”, so I asked Brian if I could buy her. The answer was NO, so over the years, I kept on …
Blog
Bumpers and/or Bow Budding etc...
Hello Gang! I work on the tug any chance I get nowadays. Pudding and bumper tires in place. And serious weathering is just about ready to commence: I think. Ballast tests coming soon.
Blog
Moving along slowly...
… an, I run down to the shop and do a little more work on the tug, with some of the crew taking a smoke break. I picked up a wrecked Pro Boat and ripped out all the electronics and hope to transfer them in this hull...I hope. Cash! post pix o …
Blog
"I'll Be Back" The Wiesel overhaul 2026
… only two RC boats back then, +Wiesel+ and my +Standard Oil+ tug. As I built more boats the +Wiesel+ dropped out of the picture. _How could I do that to my best looking boat_? In 2018 I got my first 3D printer. Upon finding a photo of what t …
Blog
Model Slipway Vosper RTTL
Hi y’all. The Tug formerly known as Harbor is now in her berth, flagged, and is now known as the O Wulf 8. She’s done!! Well..mostly. Got a couple more things to do to her, but she’s out of the shipyard, which means another project must com …
Blog
Wooden Deck
… into the night I decided to tackle my own wood deck for the tug. I used a rapid method that had always worked for me and was very much a trial and error experiment when I started building models way back in the day. Over time I found this t …
Blog
LESRO/AEROKITS/SLEC SEA URCHIN
… outer hull is covered with tissue, as on the Knocker White Tug model completed earlier. 2)&3) Keel and bulkhead parts cut from 3/16" balsa. Keel doublers glued on first side using exterior grade PVA, all excess 'splurge' immediately wiped …
Blog
Bollard machined parts and assembly
… This gives the correct look of the gusset plate on the real tug. The bollards have a small shoulder turned on the base to seat into the plate, and I’ll be flaring the thin wall on the underside to secure them mechanically. The bore is 5 mm, …
Blog
NYCentral Pilot House rough in...
… ratching up a NY Central style pilot house for the Brooklyn Tug. After days of research and hours of measuring I cobbled this rough version together. In my research I learned that the NY Central tugs had a super tall pilot house built with …
Blog
Pilot House and Barbra Streisand
Hello Me Hearties! Moving along on the Brooklyn tug with a base coat on the hull and then I framed up and skinned the main cabin pilot house. Fairly straight forward builds, but as usual there were a few problems with fit, especially on the …
Blog
Moving along nicely...I think. ;)
… mn time!), I was able to get some positive work done on the tug. I was able to move along and get the rub rails installed, which was fairly easy. Then the fantail, which was not so easy, but fun. And then I started the removable cabin rough …
Blog
Episode 3
… ing. This type of coupling worked well in the Knocker White tug. 29) Rudder assembly made up from 0.5mm brass sheet soldered to 1/8" piano wire shaft, tiller from same brass sheet soldered to 1/8" wheel collet. Shaft is to be secured to tra …