ok, my first ever attempt at posting a video on here and youtube..
my Aerokits Sea Commander restored but not finished running a direct drive graupner speed 600 8.4v on 40mm std 2 blade plastic prop. battery is 9.6v 8cell 3300mA nimh. sailing Sunday 15th August 2010 at Taylor park st Helens mbc
many thanks to you both.
At this time I have no idea of the weight except to say that from what I can gather from looking at the rudder that this boat seems to from the sixties/seventies, and is quite a substantial vessel.
She is undergoing a major refit.( spent the day rubbing down the inside of the hull, and removing paint from the toerail to the carlings.
This looks like being a long job.
if its "that old" and is a 60's/70's built model that had an I.C. engine fitted..
I would recommend you "glass-cloth" the outside of the hull..
models built during this period tend to have been built with bio-degradeable glue! (cascemite/ boneglue. etc.) show it water for the first time in 40 years and your boat will revert to kit status and basically become unstuck! if the wonky glue doesn't do it then the diesel/glow fuel used in the 60's will have undone all the joints from the inside-out anyway!
enjoy your restorations and read as much as you can on here
Ahoy
here is a few pictures underway and display of my 1978 issue Lindberg PT-109. I had this old boat for 32 years for power nothing to get excited about. not to much into speed but she goes fast enought not enough to raise the bow out of the water. I didn,t use the kit motor it was to much of a toy its design was primarley used for pool opperation. there for I replaced it with dumas 6 volt electric motor useing the kits reduction gearbox they give you. at the time of the build I had no forsight discard it, perhaps in the near future Iwill scuttle it and use 2 direct 6 volt motors the gear reduction slows down the speed pretty much if you use scale speed it is good for cruiseing at 6 knotts. the gear reduction has been coated with grifite grease as long as I had this old relic there are no wear on the gear teeth so she is good to go untill I decide to scuttle this old gear box. Here are a few attachments of this ols sailor
This is my second attempt at scratch building using a a grp hull. My first boat was an MTB/MGB built on a Perkasa hull as a semi-scale model. (see All things Rc - Power setups).
This time I have concentrated on keeping things lighter but it still weighs in at 2.5kg!
I have built without plans, relying on internet photos scaled etc using "Photo deluxe" and "Photo Express".
Virtually everything is built from plasticard apart from a 3mm liteply deck.
The dinghy is epoxy resin and microballoons, ths scramble nets are Lego!
Power is again courtesy of Graupner -2, Speed 600 8.4v using lh. and r.h 35mm props. Esc is one of those 50amp ones from the far east. These are far cheaper than the Viper Marine 40 used in my MGB, but slightly heavier and less sensitive at low speeds. Current drain (in the bath!) is up to 30A but this gives a superb on the water pace of an, estimated,8mph. Battery is a 4,600 mAhr NiMh.
(A true scale speed approaching 150mph plus).
I sail it on Ullswater in the Lake district and the Vosper Perkasa type hull shape is superb in the real waves that we get there, flying over the crests and taking aboard No water!
It really looks the part as my photos would show if I could learn how to load more than one! Can anybody help with this?
Hi" there fellow model maker.
You have done a great job on your ASRL 😊 👍 .
I have also had problems in uploading more then one photo on this site ! I dont know why ? it used to be quick n easy but no more . 😯 Albert
Just completed , not exactly origonal but not too far out. On the pond for the first time today after a rebuld, and very happy with it I am. Graupner kit, Don't know the builder, but when bought it was yellow! it just had to be put back to red. I didn't like the green deck, so it became mid-grey (gloss rubbed down to semi-mat). Powered by 3 Graupner 500 motors. Working radar and lights (worked from a key-fob, not transmitter). Sailed at inverleith Pond, Edinburgh. Home of Edinburgh Model Boat Club.
I have seen this boat operating on the water, it is a work of art, the detail is superb, the speed is I am sure
a very close scale down of the original boat.
I have rebuilt this from a damaged ex IC model. Borrowed a plan from a club member and managed to reconstruct the missing bits. Originally used a fast electric car type brush motor with 7.2 v nicads. Worked ok but nothing spectacular. Recently ventured into brushless and LiPo. Tried an inrunner but ran far to hot and not veryt fast. Changed to an Outrunner (mork torky apparently) and nearly took off! (it is a seaplane tender but should stay on the water!) The LiPo is 11.1v 2800MaH. I use a Graupner Ultramat 16 charger, don't use other than a dedicated LiPo charger and ESC. Battery misuse can result in pyrotechnics, so beware. initialyy tried a two blade racing prop but have changed this to a 29mm 3 blade brass prop to slow down the speed. I have also added more lead and will advise the final weight once I have tried the model on water. I sail with Crewe and District MBC at Boundary Park, Nr Knutsford in Cheshire.
Can anyone tell me what boat this is?
I think its a modified Aerokits fire boat or Sea queen,
The deck is different because it steps down, the cabin looks to be modified, the hull is all fibre glass with wooden bulkheads.
Nice 10cc Merco engine.
Will upload more recent pics as the pics are from about 18 months ago, I've since started re building the boat to sail then in future sell.
About the fibre glass hull it looks to be ply with a thin coating of fibre glass.
It's roughly 34" long.
The guy who the boat used to belong to had a couple of aerokits boats as well as this one, he had a sea queen and another boat but I cant remember the model name.
from looking at other boats the only boat I can really compare it with is the sea queen.
I will be uploading the boat with or without the engine on ebay in the next couple of months, I have two merco 61 marine engines that will be on ebay soon.
HI it is ST LAURIE made by LAWRENCE MANUFACTURING 106 Lawrence Road liverpool sold for A£4. 10 shillings or A£4.50p to days money in the 1950 fiberglass hull and cabin roof ply cabin sides length 42in beam 12in
Aerokits Solent Kit bought as a present in the 70's. Worked on it on and off until 2000 when I finally made a maiden voyage. Two Buhler motors driving Prop Shop props with Bobs board and 12v 17Ah SLA. Radar works. Realistic scale speed and looks great on the water. To turn I have used micro switches to cut out one motor on full rudder. The large keel was causing the model to cease turning with both props turning. I sail with Crewe MBC at Boundary Park Lake. Oct 09. Have now found out that the cabin door on my model was only fitted to the last three builds 48-014,-015 and -016. At least I can give her a name once I have decided which to use.
BRAVO ZULU SIR! I CAN RELATE, AS I GOT THIS BILLING BOATS USCG 44' MLB KIT IN 1989 BEFORE MY DAUGHTER, AND AFTER A LONG FORCED
HIATUS, RESUMED BUILDING IN 2015. I'M OVERHAULING, BASICALLY, NEW PAINT & ELECTRONICS. MY PERPETUAL WORK IN PROGRESS, LIKE MY KID I RECKON.
Thames Fire Service fire boat,this has twin 540 motors,12v pumps(not working yet) and nav lights.Fibreglass hull with wood decks etc.
The model is quite old and has been a static for some time until it fell into my hands,the name Gamma on the bow.
Looks pretty much scratch built and a very good job whoever did it.
Sails occasionally at Gang Werily Fawley Hants.
This is another work in progress,hopefully we will make it to a fun-day maybe next year.
"Gamma' was a sister ship to the well known Massey Shaw fire boat the latter on which I served during the sixties. Both craft did trojan service during WW ll, Fb. Massey Shaw also took part in the Dunkirk Evacuations. Gamma was retired in the mid 50's, the company that bought her removed her pumps and converted her to a Thames Passenger Cruiser whereafter she plied between Greenwich and Westminster Piers for several years.
WOW! BRAVO ZULU! That's really cool that you gave her life. I have built static kits most of my life, but in 89, I built my 1st RC USCG MLB. I still love statics, but watching a boat (or plane) that I've built, actually perform like the actual craft is wonderful.
HI ALL,HERES AN AEROKITS FIRE/CRASH TENDER THAT RECENTLY SURFACED IN POOR CONDITION.THIS HAS HAD A NEW PAINT JOB AND MOTOR AND ALTHOUGH NOT FAST IT WORKS WELL AND I LIKE IT.
I THINK THIS IS WHAT IS CALLED A ROLLING RESTO.
I SAIL REGULARLY AT GANG WERILY NR FAWLEY HANTS
this model has a 12v marlin motor I am in the process of fitting esc and batterys old kit the gun was from nauticalmarinemodels the figures will be the modifyed
airfix 8th army 1/32 multipose figures painted in a med garb I sail at the southport model boat weather permiting
At this time I have no idea of the weight except to say that from what I can gather from looking at the rudder that this boat seems to from the sixties/seventies, and is quite a substantial vessel.
She is undergoing a major refit.( spent the day rubbing down the inside of the hull, and removing paint from the toerail to the carlings.
This looks like being a long job.
if its "that old" and is a 60's/70's built model that had an I.C. engine fitted..
I would recommend you "glass-cloth" the outside of the hull..
models built during this period tend to have been built with bio-degradeable glue! (cascemite/ boneglue. etc.) show it water for the first time in 40 years and your boat will revert to kit status and basically become unstuck! if the wonky glue doesn't do it then the diesel/glow fuel used in the 60's will have undone all the joints from the inside-out anyway!
enjoy your restorations and read as much as you can on here
db