I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.

total scratch built on fibreglass hull 127cm x24 cm,11 months to build 6volt system brushed motor,3blade 35mm brass prop.

Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁

A Little bit forward , propshaft and rudders ar mounted
and some things on the superstruktion , im going to start with the running lights tonight

Have a nice day everybody
// Jörgen

A Little bit forward , the hull is ready for paint and im going to mount propshaft and motors , im going to work with the superstrukture so it will be ready

I am continuing to try to learn the way this forum is properly used. I want to publish here my photos of the construction of my sailboat Carina from scratch that I am publishing here. I will limit myself to photos that are useful to get a general view of the topics I am publishing

Trying to learn to use this forum properly I am publishing a video that shows an experiment I did to find out how fast the stepper motor could turn. I am using in my model of the sailboat Carina 2 stepper motors like the one shown in the video to work as a winch to control the position of the sails in a system solution where I am realizing this my own way to implement the sheets as shown on the original sailboat Endeavour. This requires my sheet control system to control the length of the sheet of the mainsail i.e. over a range of 8.3 meters. This requires the drum which is turned by the stepper motor to make 21 full turns. Details will be published in my report from scratch of building my Carina.

Just converted this 40yr old twin brushless model (scratch built from a Vic Smeed plan) to a proper independent twin system plus a sound unit. Started off with a 70s Futaba ESC on 27mhz, then on FM, then replaced with an Electronize unit on FM, then to 2.4 and now on 2.4 with twin ESCs and converted TGY S6 (twin throttles). Maneuvers a lot better and makes a better noise.

no longer available from Harbor models given to me by Norm Rusinow
oar propelled East Coats Dory

Scratch built, made up as I went along started off with single prop but much better wth 3 bladed, size is 24 x about 10. Model driver is KEN. And has been decapatated once and rebuilt using another head. Speed is good but steering not brilliant on one rudder.

I found this hull at thingiverse last year. I printed the hull from a local shop and rest was handmade.
Firstly I bought a 2426 4200kv brushless 2-3s which was too powerful and too heavy for the boat size. The length is 38cm.
And the 30Amp esc was also too big for it's size.
After that I tried small 180 brushed motor with 20A brushed esc w/brake. it was perfect (still it's heavy😂).
The bridge and deck is made by 1.75mm pvc,torpedos are made of wooden pencil.
Small battery space takes a 2s 500mah lipo. 30mm 3blade propeller.

YouTube video link is here:

aero-naut mowe 2 kit. my first rc model boat with a few extras.The kit was ok to build but the prop coupling was a length of silcone tube ? it spun off at the first test run.This was the start of me fitting universal couplings to my boats.The company were being mean using a cheap piece of tube.It runs very quiet and smooth but needed a lot of front end ballast .i made this to try and drag my grandson away from his ipad,phone and the game of fortnite .I tried to get him to help build and run it but to no avail.I now am enjoying a second childhood building boat kits !