Now there's a coincidence!😲
I recently saw a documentary about this ship, I think was in the 'Lost Places' series. Took her months to sail to Oz. Not much left now 😭
Interesting prop, looks like the style used in Kort nozzles and water jets. Colin; Rabeosch & co do these types. See attached cat.
Very nicely done Sir, 👍👍 Any chance of a video of her in her element?? 😁
I found this hull at thingiverse last year. I printed the hull from a local shop and rest was handmade.
Firstly I bought a 2426 4200kv brushless 2-3s which was too powerful and too heavy for the boat size. The length is 38cm.
And the 30Amp esc was also too big for it's size.
After that I tried small 180 brushed motor with 20A brushed esc w/brake. it was perfect (still it's heavy😂).
The bridge and deck is made by 1.75mm pvc,torpedos are made of wooden pencil.
Small battery space takes a 2s 500mah lipo. 30mm 3blade propeller.
Excellent video Sakibian, well done👍
and you're very brave to sail such a tiny boat in waters like that 😲
Hat off Sir 😉
Cheers, Doug 😎
BTW: you should put this boat in your 'Harbour', just click on 'Boat Harbour' on the left of the Home page and then 'Add your model boat' at the top.
Happy that you liked the video , will try to post more videos.
And please don't call me sir haha? I'm still 23.
About the harbour , when I registered here I didn't find my country (Bangladesh), can you please do something while your an Admiral 😛
British Power Boat 64 ft RNZAF HSL scratch built 36" R/C model with twin systems including sound. Brushless 2000kv w/cooled (pump) in-runners, 30A car ESCs, 2200mah 2s LiPos remote lights etc. Started off in 1940, new with the RNZAF and had many modifications over the years till decommissioned, including machinery reduced to twin 671 Greymarine GMs (from the original 3x 500hp Napier Sea Lions) which were finally removed around 7yrs ago and replaced with a single 650hp GM Detroit 8v92T1 (still does 20 knots in its latest configuration ! - see this on the photo gallery of this model) This boat is in far better condition than the ex Phil Clabburn restoration of HSL 102 (he didn't have much to start with) and the hull has never had any major rebuild apart from being glassed to the W/L. Even today there is no way most people would pick it for 80yrs old. Those hulls never age! (ie some of the beautiful 'Whale Back' conversions still around)
Thanks for the positive comment, and yes, it''s a great pond, part of the Gulf Harbour development on the Whangaparaoa Peninsula in Auckland. it is home to the Gulf Harbour Radio Yacht Club, the members having built the jetty, and they race a number of times a week. I am about 15 km away in Red Beach but its worth the 15 minute drive on a day such as this one.
Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .
This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.
Thanks for the kind comments. Planking did take a couple of days but was not done all that neatly (just clamp and cyno) as I was glassing it later - it was all thin resin coated inside to seal it). Planking was just a hint at the original so you could just make out the planks through the glass. Have included a few more pics of the motors and interior which is not that flash but is unseen, (more for the fact that I had seen the original and was sort of putting down what I remembered from when I was 15) There is a small picture at the top left of the stairs which on the original, was a Photo from an HSL looking off the Stbd rear 1/4, to 2 64ft HSLs side by side climbing over its wake at speed
The stair set is the original from the wheelhouse to wardroom, which has been kept and used again by the present owner (down to utility room in front of engine room) and still has the original 'POWER BOAT' rubber treads (not bad nick for 79yrs old!)
My dad built this over a long period of time, starting in the '80s. The hull is fibreglass and the rest is scratch built from plastic card, balsa, ply, wire and anything else he could adapt.
Although he installed the motors, props and rudders he never completed the RC installation or tested it. I inherited his boat models a few years ago and wanted to "finish the job", getting the model on the water. After installing the RC gear and batteries over the last few months, this weekend was the first sailing outside the bath at the Valley Gardens boating lake.
Happy to report that it sailed really nicely, seems to be reasonably stable although I did restrict it to calmer times when the MTBs and faster boats weren't running !
HMS Cadiz was a battle class destroyer, laid down and launched during WW2 although she didn't receive her commission until 1946 so didn't see combat with the Royal Navy, serving with the home fleet. Due to the changeover in pennant numbering she was originally allocated R09 and later, when the admiralty decided to revert to the D for Destroyer pennant numbering she was assigned D79. To reflect this my model has D79 on the starboard side and R09 on the port side.
She was sold to Pakistan in the late '50s, and renamed PNS Khaibar. She was sunk with the loss of nearly all hands in 1971 in the indo-Pakistan war.
scratch built, with out board motor,2 blade prop, 30 inche long, still need to install nav lights, chairs are from doll house, runs on Lipo battery, runs and turn excellant, and no that is not a beer in his hand it's a bottle of coke
My second scratch build. SA Navy "Spioenkop". 1:80 scale. 2 Mtroniks 600 motors on the scale 40mm (home made) props running on 6v and Hobbywing 860 brushed ESC. Jetdrive (also homemade) runs on a 550 motor (I think!) and a 1060 Hobbywing ESC running on 12v. Chopper is a heavily modified Hobbyboss RN Super Lynx. Hangar door opens as well as chopper moves on helideck with worm drive and magnets. idea is that this would happen sequentially ... but haven't managed to sort that out as I am "electronically challenged". Suggestions welcome!
Sad to say, I'm not actually a member of the Centurion Model Boat Club, despite having lived here for a number of years. But I'm sure the guys at the club would love having your model sailing there. Perhaps one day I'll have the time to venture to Emmarentia Dam to see the Spioenkop and all the other boats of the GMBC in action. Best regards, Glyn
Just a further update on my MEKO Frigate. Thanks to the patience and advice from Doug together with a local boff friend, JohnO' with advice on electronics, I have now ventured into the realm of YouTube for the first time and am able to provide the short video suggested by Reilly4 some while ago. This sequence is returning the heli back into the hangar. The "Out"sequence is the reverse. Both "Out" and "In"are sequential on one channel of the TX.
I have been told that the address below must be pasted into your browser. Hope it works.
Scratched built on a fibre glass hull, home made sails with a modified star wars figure
Bought from a member of our Kingswinford Model Boat Club, Peter Ellis, who sadly passed away
Scratch built from a 1975 free plan, hull is balsa frames sheeted with basswood and covered with 3/4 oz fibreglass cloth, superstructure is styrene sheet, missile launcher from balsa block, forward bofors torpedo launcher from styrene sheet and wood dowl, photo etch ladders, white metal handrail stanchions, other fittings are brass and resin, lw-02 radar and directors are from shape ways rudders and stabilizers are balsa block, you get the idea.
A very nice execution of the old Model Boats free plan. I still have those plans (somewhat tatty after all these years) as well as the MB magazine they came with. How does she sail? Best regards, Glyn
Many thanks for your kind words, I've not sailed her yet, only test tank and had to up the water line a little bit for more stability, I also scaled up the plans to true 1/96 as the plan is around 1/100, the 1/96 fittings I bought from fleetscale were out of scale to the plan, and using the 1.1 water line length noted in the magazine article.
Cheers Colin.
I recently saw a documentary about this ship, I think was in the 'Lost Places' series. Took her months to sail to Oz. Not much left now 😭
Interesting prop, looks like the style used in Kort nozzles and water jets. Colin; Rabeosch & co do these types. See attached cat.
Very nicely done Sir, 👍👍 Any chance of a video of her in her element?? 😁
Cheers, Doug 😎