Do you alight the lights remotelly, or just locally?, do the lights share a single group or maybe you have several groups of lights?, could you please, show us the device used to switch them on?
Hello
i can start all light from the remotcontroll , it is to kinds o lights one 6 v and one 3.5 v , runninglights are 6v and working lights are 3,5 v .
the small led light are 3.5 v. i made a switch of one servo and 2 microcontakts
Sorry fore my bad English
// Jugge
Hi Cash - pity we live so far apart looks like San Reno would give Darth Vader a run for her money - pretty impressive............nice sized lake too........
One question though - where's the Road Runner ?
A ship that I served on 1966 - 1969 Scratched Built. (Sails well)
Wiesel German Torpedo Boat was given by a family who had dropped it and smashed completely had to rebuild(persons were going to dustbin it + radio and engines SAVED( and sails well) HMS Daring sailing at Maunsell Lock 18th Aug 2019 also Bismark making its Maiden Sailing after many trials in the Bath Great Day Out with Tone Valley MBC
I spent some time in the Middle East on H.M.S. Nubian ( Tribal class frigate)
H.M.S. Relentless ( Daring class) followed us back to UK. I remember days and days of watching her just behind us in the Bay of Biscay, which lived up to it's reputation. I always thought the Daring class was the last warship that really looked like a warship with her twin forward gun turrets.
Mind you I think you would have wet feet 24X7 on her waist decks.
This is my model of the KG5. Futaba 2 ch, electronize ESC, 12v 7amp gell cell battery. The motor is from a Ford radiator fan and pulls 1 amp current. Scratch built in the 60.70s and revamped in the 90s by myself. it is 1/96 scale @ 72 inches long and a width of 14 inches.
My scratch-built 1/72 scale Type 1936A (mob) destroyer, photographed by a good friend at Albert Park lake in Melbourne.
It has rotating turrets linked to the gun directors and rotating torpedo tubes, the front 6" guns elevate and there is also a ship's horn.
Good way of revolving the turret Doug, but I've
taken the easy way by using a servomorph from
Action electronics😀https://www.componentshop.co.uk/p96-servomorph.html
using a couple on my 1/96 USS Kidd destroyer, will post when finished.
Hi Rooky,
Bit late getting back to you on this - bin kinda busy🤔
I hear where you're coming from (as our colonial brothers might say. Sorry Ed 😉)
Back then there wern't no Action Electronics / Component Shop so I just did what seemed logical! Worst (and smelly😝) part was making the circuit board.
No PC, CAD or even photo-reactive circuit board back then.
Yep, I know the Servomorph. I've bought one to experiment with on a Plastic Magic project.
To drive the gun turrets on a 1/350 King George V battleship, where there ain't enough room (never mind weight margin) to mess about with cogs and pulleys.
I'm thinking two micro servos, Y lead, or even independent AB and XY turrets.
My German Turnigy re-brand has two pots that I can assign to these!
Many thanks to Colin-H for sending me the KGV kit in a wonderful package of 'stuff' as recompense for renovating and converting his Taycol Supermarine motor.
Was like Christmas all over again 😊
Cheers, Doug 😎
This is a 1:100 scratch build of an (unnamed) Fort/Park class freighter, based on Jim Pottinger's drawings of a North Sands design. I'm building this as a DEMS ship. it has smoke and an overboard water discharge (if it works!).
These ships were built in many Canadian shipyards during WW2. Some went to British Admiralty - with Fort XXX names - and some went to Canadian government - named for Can. parks.
"Searcher" was a Graham Goodchild design offered as a free plan in "Model Boats" in December 1981. Here is my version , many years in the building and finally nearing completion. Access to the hull on the original design was via a hatch above the cockpit - I had no faith in my ability to make it water tight so went for removable grp. hatches. The model is activated by a reed switch just in front of the rear hatch, which saves me the hassle of doing/undoing all the nuts (this had not been fitted when I took the first picture). The rear hatch gives me easier access to the drive coupling. The name "Nimbus2" is in honour of one of Dan Dare's spaceships in the Eagle comic. The third picture shows the ship in its final state with added 'enhancements' and working lights.
This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.
I’ve always wanted to build a WW11 oil tanker of the type my father skippered during the war. it’s named after a tanker he left to go on leave. The crew didn't want him to leave as he would take their luck. it lies off the west coast of Scotland, the captain, a friend of the family, going down with her. it's not the actual Cadillac as it was an older ship, artistic license!
Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .
i can start all light from the remotcontroll , it is to kinds o lights one 6 v and one 3.5 v , runninglights are 6v and working lights are 3,5 v .
the small led light are 3.5 v. i made a switch of one servo and 2 microcontakts
Sorry fore my bad English
// Jugge