I'm a little late posting this photo but on Aug.21 the Confederation Marine Modelers had a event at 9AM at Spencer's pool for working boats so my Fireboat Edward M. Cotter had a sail for the first time in 2025 It's the red Fire boat. Just thought I'd add a real photo of the Buffalo N.Y. fireboat that visits Port Colborne, Ontario Every Aug. first weekend. There was more working boats but to take a photo with a I Phone 8 and sail a model is kind of difficult.

Back at Towne Lake for more fun and friendship. Had a good time, we saw 2 subs in the water, a few tugs, launches, working boats and an old MRP deep vee and a Micro Magic. I had a great time as I finally got my Italeri Vosper handling decently even in the windy conditions we had. A little more tweaking and she’ll be spot on, but I’m pleased with her for now.
Cash

Modified HegI Fairplay V tug built by My late Father. Mods include bigger 65mm Prop in a brass kort nozzle, working fire monitors, lights, radar, engine sound and grappling hooks to rescue nitro boats. Built 1980-81.

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

HI to all you Fire Boaters,
I have decided to finally bring my Fireboat out of the closet and up for inspection.
This is the first of my many boats I am showing, I will probably show others in the future.
I started to build her back in 2006 after being off work and having a shoulder operation. She was not going to be a R/C boat, just a bit of something to do whilst on recovery.

I have a 34" still in the box unmade, purchased back in 1994 from Aerokits.
I drew round all the parts and then shrunk them on my scanner. She is 27" long I think that's
just fraction over 1/20th scale . She is almost all balsa except the 2 under skins that are balsa laminated with 1/64th ply. The hand rails are 1/4" balsa blocks I cut from a strip and the rail is ally tubing.
The mast is made from plastic strip from packets from the model shop.

When I returned to work she was put into the shed and left unfinished.
I stumbled across the Fireboat website and registered in 2009 when I was off work once again. This then made me think more about working on her again and I decide to turn her into an R/C model. So out she came and I fitted an Electomax Delta 480bb motor and a M3sonik esc.
I also purchased a couple of Robbe fire monitors, put them together shortening the nozzles and cutting the bottom of the base of to try to look a bit moreto scale. I know they are not the correct type but if I want to go down the road of getting them working then these ones will.

Then off I went to Wilkinson's and bought some paint. Then set out to paint her, as I brushed on the paint it seemed to be drying almost as quick as I was painting her. Dragging the paint I had just put on with next brush stroke. What a TOTAL DISASTER !!. I gave up on her and back into the shed she went.

2010 arrived I started again rubbed the paint down a bit and bought some Tamiya spray acrylic and started spraying, underside red, it seemed look all right. I used a nice new roll of low tack masking tape, taped up the underside and the decking and sprayed on the black on the sides. I thought that look all right. Took off the masking tape, which also took off the red paint and the dope from the decks. Another DISASTER. Back in the shed she went once again.

A couple of months went by and I was up in Norfolk on my own boat and watching the workers in the boatyard, ideas came to me and when we returned home, out she came and I repainted the sides
and then with red oxide paint I painted her undersides to make it look like antI foul paint. I used some white stripe to cover the join of the two different paint colours.
I had bought some roundels in Anglia Model Shop in Gorleston and some lettering in a shop in Norwich and after painting put these on.
Not looking fantastic but passable I was a little happier with her, but still not satisfied, back in the shed she went again.

Now after so much nagging from my brother out she has come, I've started again. He talked me into changing and trying a brushless motor and a smaller esc he had in his tool box from his helicopter he was shelving as its rota head was damaged beyond repair.
I have now fitted them and if they work I will change the esc to a forward/ reverse esc in the future at some point.

Sea trials are still away off more than likely in the spring, because the decking has yet to be painted. That will be the next job.

I think that's all for now, as I have probably bored you all to tears. I hope update as I progress further.
Just to let you know I'm Tom (alias BOATSHED).