I have bought it from Robbe in Germany. it is 7 years old and it is working very well. There are two brushed motor and navy ESC from Robbe. I use it to drive some lake and pool in my city.

Just nearly finished my sea queen and had one outing and it did all I wanted. Scale speed and very plesed with it. Standard motor and 12 volt battery. it was last winters project but only just finished. My 1st motor boat as my others are sail.

This model of the tourist attraction in Liverpool a few years ago.Sadly after a couple of mishaps all four have been withdrawn from service. The model however survives. it was scratch built from photos and site visits by myself (Max Ferrie).There were no plans available. it is about 28inches long and roughly 1/12 scale.It was built almost entirely from plywood. As you will see from video it operates on land and water. it is six wheel drive using differentials on all wheels. When in water it is prop drive. it has two small electric motors for power, the wheel drive being very low gearing (too low really it goes very slow on ground). it was completed in 2010, and is filmed sailing at the portable pond at Toys For Boys in Waterloo in 2010. it has sailed at Hoylake MBC also.
It is powered by two 6volt 4AH batteries in series to give 12volts.

Scratch built 1/48 scale Mersey ferry Snowdrop in current use on the Mersey (ex Woodchurch)
Model interiors fitted out with tables chairs people etc and 72 leds light to Illuminate the interior saloons.
Just completed and maiden voyage on Hoylake Lake on the Wirral.
2.4Ghz radio and a bilge pump just in case. Sails a treat with 100 passengers. Extensive use of plasticard on superstructure. Fibreglass hull from own mould.
See sailing location at www.hoylakemodelboatclub.co.uk
Our club can supply the hull if you want to have a go at building one.

twin speed 400s driving stock (kit) props off 1 6 cell NiCad. Speed is "moderate scale"

Some updated photos of my Crash tender. Built from Kitshack kit. Close to maiden voyage now when I can test the twin brushless motors.

This style of launch is gaining popularity for fast crew and supply boats in the North sea.

This boat was designed by me from photos available on the web. The hull id fg, all the rest is plastic and wood

Bourbon Orca is an anchor handling vessel based in Bergen.
The owners and builders wouldn't let me have a set of lines, so, I designed this myself on Delftship from photos available on the web.

The hull is plank on frame, driven by twin 900 size motors off 12v. She has an action twin esc and mixer which enables her to pivot on her own axis without the need to use the bowthruster

more pictures of the trawer still under construction

Trawler built from a hull bought from a moulder in Newbiggin by the sea based on a trawler fishing out of Blyth harbour
it has a Graupner speed 700BB Turbo motor on a kort nozzle it is nearing completion I will post more pictures when it is finished

Built from a plastic hull given to me by a friend who bought it at a car boot sale the hull has been reinforced with fibreglass then like most kitShack
builds a box was made to hold the running gear it will be powered by a brushless airplane motor & 11.1v lipo battery
I will post more pictures as it progresses

This is the first sail of this boat its running two geared Como-Drill 2.5:1 motors and seems to be OK with it current setup.