Hi!
This is a scratch build from plans, of the "Angel's Gate II" , at the Los Angeles Maritime museum. This example has a bilge pump, diesel horn, and will be adding a fire monitor. My nephew is pretty excited about it, he is 4, and already has been practicing with the transmitter!

A scratch built model of a Gloucester USA fishing schooner 1900 era. Pine plank on frame, 2 channel radio with a Lego 9volt drive unit as sail winch controlled each way by servo and micro switches, the deck is planked on a thin ply sub-deck and deck openings are sealed with Vaseline. The deep keel slides up into a box through the keel and secured with a bolt.

HI All, Heres some pics of my "American" tug boat based on one of McAllister's tugs. it is scratch built from Images on the net, plank on frames in pine, cut on my bandsaw. it has working lights and radar scanner. it's powered by an electronize 540-12 motor and a 6v 4amp SLA battery.

this I my collection of lifeboats all scratch built

This model of the tourist attraction in Liverpool a few years ago.Sadly after a couple of mishaps all four have been withdrawn from service. The model however survives. it was scratch built from photos and site visits by myself (Max Ferrie).There were no plans available. it is about 28inches long and roughly 1/12 scale.It was built almost entirely from plywood. As you will see from video it operates on land and water. it is six wheel drive using differentials on all wheels. When in water it is prop drive. it has two small electric motors for power, the wheel drive being very low gearing (too low really it goes very slow on ground). it was completed in 2010, and is filmed sailing at the portable pond at Toys For Boys in Waterloo in 2010. it has sailed at Hoylake MBC also.
It is powered by two 6volt 4AH batteries in series to give 12volts.

Scratch built 1/48 scale Mersey ferry Snowdrop in current use on the Mersey (ex Woodchurch)
Model interiors fitted out with tables chairs people etc and 72 leds light to Illuminate the interior saloons.
Just completed and maiden voyage on Hoylake Lake on the Wirral.
2.4Ghz radio and a bilge pump just in case. Sails a treat with 100 passengers. Extensive use of plasticard on superstructure. Fibreglass hull from own mould.
See sailing location at www.hoylakemodelboatclub.co.uk
Our club can supply the hull if you want to have a go at building one.

Scratch built out of wood and fibre glassed with a car fan heater motor on 2.1 reduction

Just finish this Dumas kit. About 20% is scratch built. I found the plans weak and the instruction booklet useless.

Scratch built from own plans using mainly balsa with some ply, brushless motor, best speed up to now 43 mph, hoping to get it up to 50 mph.
Hope it does not live up to it's name 😁

Alan

Single 550 Brushed Motor and Reversible ESC, 2S LiPo, 2.4GHz Radio System, Turnigy Blue Prop, 2 x 9G servos for rudder and lights.

Functional Nav Lights and wailing siren.

OA Length 690 mm, Beam 180 mm, AUW 1656 grams.

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

Scratch built New York Harbour tug. Wanted something different from the norm. Quite powerful, too much really had to power her on 6v even though she was geared down. Up for sale now on ebay. Dont get the time to sail her much because of work.