Scratch built 1:12 Shannon Ilfracombe 13 09

This amazing model is SCRATCH built (including the plug for the hull!!!) by John Sluman

Most fittings are machined metal, some incredcible skill in construction.

Boat in this video is running on brushed motors - it is now converted to brushless.

Hi. This is my 2nd scratch built boat since lock down began. The first was the H S L 103 finished 6/7 weeks ago. Still waiting to be tested outside of workshop. This one is built on a fibre glass hull,and has a length of 44 inches and a beam of 16. My power plant is twin out runner motors purple power. 600kv, running through twin 70 amp ESC and with 4 cell 5000 amp lipos feeding them. All accommodation is made using 6 mm three ply. And every fitting you see on the boat was scratch built by me. Lighting system is 12 v grain of wheat .props are three bladed brass 45 mm by prop shop

AL KUBAR 2 Is a " Tug Boat " - 1:24 scale model of a harbour tug operating in the United Arab Emirates. This large tug is 40in long by 14in beam. Uses twin electric motors and displaces approx. 45lbs.
Owner Dave Moxam travels from Sheffield most week ends is a member of the Buxton Model Boat Club.

Commentary from Dave

As a follow-on to Grahams' comment on our latest collaboration on a smoke pulsing 'capacitor driven' device, we thought it was time to 'chuck it out there' and see what you think. I saw the vid on the guys warship with the very fancy gun smoke system a while ago and thought there must be a simpler way than the sophisticated and technical way he did it.

Having done press setting in my early days, I remembered that a big press we used to set had a hydraulic capacitor which helped get the ram moving (pretty much what electrical capacitors do for motors etc) I started with a common party balloon with no container and knew Graham would be interested, and it progressed from there. As usual, Graham has done a fancy bit of electronic control on his, with solenoid and timing and has it working nicely.
(just received my new solenoid which I will be adding in due course)

Balloon is stopped from filling by a micro switch to the air pump and air is released by solenoid at whatever timing you need (depending on how well your smoker can keep up). If the system has no leaks, the 'capacitor' can hold air indefinitely, ready for use, and will re-fill automatically, (pump only runs to re-fill) This idea can be modified to suit anything (guns, exhaust startup and run, steam to simulate steam whistle etc) Balloons of all shapes can be used eg -(long thin sausage balloons could be fitted inside a tube if space is an issue).

With a good air pump, the 'capacitor' will fill quite quickly and some good pressure can be achieved.
JB

Found a sound by accident which sounds quite a bit like the sound of the GM Detroit 453 2 stroke diesels fitted to this boat (still has these today) Vid from cockpit is the sound I discovered while mucking around with some old electric motors, and my new voltage controllers which just turned up.
I'll add the link to the real engine for comparison (next post here). Sounds to be revving really high but being 2 stroke it's only doing around 2800 rpm!

JB

This is a 1984 re-issue of a Lindberg Chris Craft Sport fishermen purchased used on Ebay. Some of the parts where broken and some partially assembled. The model did come with 2 MACK RC motors and some fabricated wood parts, including a template for the aft deck. The interior was assembled from quarter scale doll house items except for the dinette. There are 4 underwater LED bulbs with a dedicated power supply. The running, interior and radar unit are powered by a separate systems from the hull electrics. The second Li-po battery is for backup and balast. There are number of additional items added since these photos were taken including a stern seat and larger radar array .

I have been building my scratch build PT 109 for the last 3 months, working sometimes only one or two evenings in the week. As you must all know you can only do so much before you have to stop and wait for glue or paint to dry :( but at last it is now completed, RC gear installed and a mighty 48" in length at 1/20 scale. Next will be the lake and a final trial run, I completed a 'bath' test a couple of days ago and it only just fitted in the bath but both motors run great. hope you like. Andy

A Little bit forward , the hull is ready for paint and im going to mount propshaft and motors , im going to work with the superstrukture so it will be ready

Trying to learn to use this forum properly I am publishing a video that shows an experiment I did to find out how fast the stepper motor could turn. I am using in my model of the sailboat Carina 2 stepper motors like the one shown in the video to work as a winch to control the position of the sails in a system solution where I am realizing this my own way to implement the sheets as shown on the original sailboat Endeavour. This requires my sheet control system to control the length of the sheet of the mainsail i.e. over a range of 8.3 meters. This requires the drum which is turned by the stepper motor to make 21 full turns. Details will be published in my report from scratch of building my Carina.

Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .

This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.

My dad built this over a long period of time, starting in the '80s. The hull is fibreglass and the rest is scratch built from plastic card, balsa, ply, wire and anything else he could adapt.
Although he installed the motors, props and rudders he never completed the RC installation or tested it. I inherited his boat models a few years ago and wanted to "finish the job", getting the model on the water. After installing the RC gear and batteries over the last few months, this weekend was the first sailing outside the bath at the Valley Gardens boating lake.
Happy to report that it sailed really nicely, seems to be reasonably stable although I did restrict it to calmer times when the MTBs and faster boats weren't running !
HMS Cadiz was a battle class destroyer, laid down and launched during WW2 although she didn't receive her commission until 1946 so didn't see combat with the Royal Navy, serving with the home fleet. Due to the changeover in pennant numbering she was originally allocated R09 and later, when the admiralty decided to revert to the D for Destroyer pennant numbering she was assigned D79. To reflect this my model has D79 on the starboard side and R09 on the port side.
She was sold to Pakistan in the late '50s, and renamed PNS Khaibar. She was sunk with the loss of nearly all hands in 1971 in the indo-Pakistan war.