- Dave M🇬🇧Vice AdmiralNice and fast and steadyLike 1Liked by EricMB
- BOATSHED🇬🇧CaptainI love the way these hulls stick to the water, they are very stable on the turn as well. Nice boat.Like
Photos & videos
Search results
115 posts · Page 5 of 10Length: 610 mm
Width: 195 mm
Material: plywood 4mm plywood airline 0.8mm, ironing mahogany bar.
Engine: AC Brushless Turnigy XK2845-1980KV inrunner
Controller: 40A
Battery 2x 2200mAh 30C 3s Lipo
Some shots of my scratchbuilt 42" Sterling ChrisCraft Corvette.
Twin brushless on 2 X 3S 5000 lipo.
Have nice day / Ivan
- BrightworkCommodoreWhat a stunning model. I really feel motivated to add lighting to mine now. Envious for sure
www.vgmbc.org
Motors Are E-Max GT2820/07
- SkipperVGMBCPetty Officer 2nd ClassHello Skegness..I am using 2 E-Max GT2820/7 brushless Motors. These Are UK purchased from BRC Hobbies (based Northolt) Cost £20.95 each.. these are 850 KV..using Twin Mystery RC 70A Forward Backward 2-7s Brushless ESC (with Ubecc) about £20 or less on EBay (HK).
Run Time..1 Hour, mix of fast and slow Sailing..Depends on use.
Using 2 X 7.2 NMH Volt Battery Packs..at 5000mah each.
She Goes Like fast, and cuts through water lovely.
Have A Similar Setup (Different Emax Motors) in my Models By Design interceptor 42 Boat (42 inch length)..Tooo Fast for me..lol..Any Other info PM me for phone number..Happy Sailing
Edit: I've managed to upload a video of her in action on u tube ,see link below
- RNinMunichFleet AdmiralHi Ned, Welcome aboard 👍
On my Sea Scout (little brother of the Sea Queen) I used silicon sealant (a la bathroom!) and a small brass screw in each corner. it had to be good cos I had the RX, RX battery and rudder servo tucked in there!
My boat was also started by Dad in the sixties. He had it free running with a Taycol Target and wet (very!) 6V lead acid cells. I upgraded to RC and Decaperm motor about 25 years ago and am currently restoring and converting to brushless 😲
Happy boating, Cheers Doug 😎Liked by Brucef102
Currently powered by 2 x 480 brushed on 11.1v, both motors independently controlled by 2 ESC but soon to be refitted with 2x 1000KV brushless.
Planes beautifully and with twin rudders turns on a sixpence!
- boatyChief Petty Officer 2nd ClassThat's an excellent running time for a fast model.
😀
It gives a great indication of what can be achieved with brushless motors.,
I'll have to try brushless motors in some of my fast scale boats. I only have one brushless powered model at present, this being the Proboat Blackjack 29 fast electric.
Boaty
Powered by a 1000kv brushless on 11.1v, its quick across the water and very stable.
I sail with the Potteries MBC in Stoke.
- circle43nauticalChief Petty Officer 2nd ClassBRAVO ZULU! Nice boat, it reminds me of my brother's 13' 1956 Penyan that he completely restored back in the 90s. Love the mahogany btw.
HAVE A SAFE RC BOATING DAY
FAIR WINDS & FOLLOWING SEAS
GOD BLESS AMERICA
- jenteckRecruitVery nice model was it a kit or scratch built thank again
excellent video alsoLiked by CraigRobotham - CraigRobothamPetty Officer 1st ClassThese are originally an I.C kit 1/6 scale , there is a company in Germany still making them believe they are called MHZ. I think I've scene them in 1/8 and 1/35 scale too . Also other builders have used water jet drives on films I've watched . This one is running on brushless motor normal prop and direct drive as all my boats have so far . Keeps the cost of spare parts down %uD83D%uDE0E%uD83D%uDC4D
- sharpy1071Chief Petty Officer 2nd ClassThank you figtree7nights, up for sale now!! it's stupid on 4 cells, mad on three but behaves very well on two. I sail it mainly on three cells as I have more 3 than anything else.
- figtree7ntsAdmiralGreat looking American Enterprise, I remember 30 yrs ago or so I had the kit but lost it during a move. what a shame such a great looking boat! 😭
- sharpy1071Chief Petty Officer 2nd ClassThank you figtree7nts. it is a great looking boat there is no doubt about it, wish it were mine, handles very nice at speed and slow.