Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁

Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .

This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.

This is a restoration of a launch I was given that was found in a rubbish bin on a farm here in Auckland it is an old RCM ? plan built 'Fairacre' and was pretty rotten when I received it as it is made in balsa and had been wet for quite a while. I stripped it down, re 'planked' large portions of the hull and fiber glassed it, re- built the cabin, re- marked the deck planks, fitted lights, curtains (ex Graupner Commodore bits from the 70s I had kept), stern ladder, cleats etc. it is fitted with a 540 brushed motor (originally had an old Graupner monoperm) and 70s Graupner ESC and Using 2.4 Radio gear. I still have a few things I'd like to do such as a re-wire, fitting chine spray rails, better motor and maybe some safety rails, but for now it does the job.

Asheville Class gun boat model is 51” long weighs 22 lbs. hull covered with 2 layers of 2 oz. fiberglass cloth and resin. All plywood and balsa construction finished with fiberglass resin and Model Master paints. Working radar mast, turrets, desiel sound, whopper sound, general quarters sound, sierene. Power is MACK
Drives 12 volt system 2 x 2 6volt 3000 nimh each drive. Very fast in the water.

So, here's my current project in the works. I got a nice 25-inches Deep-Vee fiberglass hull a while ago and now (finally) have a concept for it. Almost by accident I came across a plan for an American bass boat which in turn reminded me of a boat that caught my attention when I was a kid while reading a boating magazine. The boat is a 28-footer from a now defunct firm named Uniflite. it was a small deep-sea sports fisherman called "Salty Dog". Uniflite was very well known within the American boating circles during the 60s, 70s, and 80s. Uniflite created and supplied PBR river patrol craft to the US Navy between 1965 and 1972 for rivers in Vietnam using an already existing pleasure boat hull and adapting jet nozzles for propulsion. So, I just created a prototype template of the cabin so more to follow 😎.

First and foremost I would like to thank everyone that answered my question about fiberglassing. Your help guided me through the process and I believe that it came out very good, but still needs more work to smooth out the resin and of course I will post more progress pictures later on.
The name of the tug is “STATIA RELAINT”.
This is one of a fleet of four vessels built by Samakona Yards in Spain.
I chose this one because of the stealth lines that has throughout the structure or just because I love how it looks.
I am an artist (painter), and we fall in love with colors and shapes, so maybe thats another reason why Im building this particular one.
I was lucky to find the plans and enlarge them to 33” approximately 1/32 scale.
This will be my FIRST scratch built even dough I have built others from kits, but never like the experts I see in this forum.
I will be open for questions, suggestions and criticism.
Thank You
Julian
From Sunny Miami.
😎

Made from card then put it all on ply wood then fiber glassed .

This boat is scratch built on a Fiberglass Hull. The Lily was one of two ferries built in 1900. Her sister ship was the Rose.
The superstructure of the model is largely light-ply and paneled to resemble the orginal. She had an open top deck and as you can see the navigation pods were open to the weather.
A semaphore signal arm was included as radio was not yet used to communicate with each other on the Mersey.
The model is approx1/48 scale and built from a couple of photos and sketches that exist. She is powered by two 340 electric motors and controlled with 2.4ghz radio. A 12 volt battery gives the power. Both decks are individually planked.
She has sailed at Hoylake.

Another damaged fiberglass hull rescued. every thing else made by me. At 3/4"=1' a very big model. Completed 2012 but only sailed twice, a very good sailor just needs a big lake. The mast lifts & folds forward after removing the hatch. The top mast lowered, the bowsprit retracted and the sails raped around the shrouds, held in place with masking tape. ( this stops the lines from tangling.) Takes about 5 minutes to reassemble.

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

This is a 40" long model of a gas powered Berkley Company kit of a US Air Force crash boat from 1955. The plank on frame kit was in production for about 10 years and was meant to be powered by a model airplane gas motor with a single shaft. it depicts an experimental 50 knot rescue boat (painted in a peace time color scheme) during service with the USAF. if successfull it would have been put into production designed to be a replacement rescue craft for all Air Force 65' crash boats. Unfortunately for the crash boat program the Air Force lost interest as helicopters were become a reliable way of rescueing downed pilots along the coast. The prototype and a sister boat were scrapped, as was the entire program.
The model was given to me to be restored(top picture) for the son of a retired USAF veteran that was a crash boat crewman. The model was built in 1957 and had been run a few times on a tether line, R/C was pretty expensive back in the day. I stripped the hull, filled in all the cracks and rebuilt the mast. I added a small boat, davit, liferaft, coxswain station, spray shield and deck hardware among other things. Actually all the owner wanted was a paint job, he was very happy with it's new appearencep! Although I fiberglassed the wooden hull and made it watertight, the owner doesn't plan to run it, just a memorial to his dad's service. I really enjoyed working on this "rare bird".