Another damaged fiberglass hull rescued. every thing else made by me. At 3/4"=1' a very big model. Completed 2012 but only sailed twice, a very good sailor just needs a big lake. The mast lifts & folds forward after removing the hatch. The top mast lowered, the bowsprit retracted and the sails raped around the shrouds, held in place with masking tape. ( this stops the lines from tangling.) Takes about 5 minutes to reassemble.

I have bought it from Robbe in Germany. it is 7 years old and it is working very well. There are two brushed motor and navy ESC from Robbe. I use it to drive some lake and pool in my city.

Bourbon Orca is an anchor handling vessel based in Bergen.
The owners and builders wouldn't let me have a set of lines, so, I designed this myself on Delftship from photos available on the web.

The hull is plank on frame, driven by twin 900 size motors off 12v. She has an action twin esc and mixer which enables her to pivot on her own axis without the need to use the bowthruster

Single 550 Brushed Motor and Reversible ESC, 2S LiPo, 2.4GHz Radio System, Turnigy Blue Prop, 2 x 9G servos for rudder and lights.

Functional Nav Lights and wailing siren.

OA Length 690 mm, Beam 180 mm, AUW 1656 grams.

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

These are photos of my build of the Kitshack 46" RAF Crash Tender. it is powered by 2 brushless motors through two esc connected via y lead

Hi, this is Hercules 51" L 14" Beam was scratched built
12 years ago . it's powered by 2 robbie 1000 off a 12v
battery with a vantec ESC . it has a working fire monitor
2 sound systems with 2 -4" Kort Nozzels .
It is all planked by Cherry veneer deck and superstructure
It olso has working lights for the night runs.
I run this tug evry weekend for the past 10 years and it
still looks new . I live in Whitestone NEW York and I
belong to the Empire State Model Mariners Club .
Check us out at Empire State Model Mariners RC Groups
I am Band1.

I've at last done something with my mystery Orange hull, featured earlier, whilst in St Lucia last year I saw a launch used as diving support with almost identical shape called 'KIKA' so that's what it had to be!
Power from an old 600 Johnson type motor with 7.5v battery and 20A ESC, with prop & running gear from my oddments box. Tried her at Mangerton Mill last week, she goes well but needs a more powerful ESC as 15A fuses blow at 3/4 power, also veneer deck has started to bubble - so work in progress really!

Chris

HMAS Fremantle (my first build and is still a work in progress) is a semI kit, hull and some fittings were supplied, most parts have been scratched built. She is powered by two MFA RE-385 5-Pole DC Motors, each controlled by a Mtroniks MicroViper Marine 10 ESC, supplied by one 6V 3.4 Ah lead acid battery, she has a running time of approx 90 minutes on the lake.

Fibre glass Arrawana 22 inches less than a kilo,brushless 3600 kv 60 amp esc runs on 11.1v 3cell . Pretty fast but still exp with props

RAF High Speed Launch, speed 400 motor,Mtroniks Viper 10,ESC. 7.2v 3300Mah, model is 22".Scratch built, from photos and my own drawings scaled down and modified from my aerokits fire boat, I get about 15 minutes on the water running time on full speed.

This is a aero -naut toben tug it is kit built it has a aero-naut 6v geared motor it runs on a 6v 4amph sealed battery has a old type speed controller sliding arm type the battery last in excess of two hours its great with korts nossole steering the hull and cabin are abs and the most water proof boat I have ever sailed on Southport model boat club one of the fleet have changed the set up have a old mfa electro thottle esc in instead now yet to try the new setup