Another boat the same as mine seen on a local auction site. Anybody have any ideas as to the manufacturer ?. The dimensions are L 31", W 71/2", H 7" and by the looks of it were Ic powered (or at least mine was and was later changed to electric). Hulls are balsa and planked to 1st 1/4 then finished to the stern with with longer angle cut 'planks'. Cabin top is ply sides with balsa roof and deck is ply and has printed ? planking.
Someone will know but I haven't been able to pin it down to any kit even after going through all my 60s and 70s Model Boat mags.

HI " I thought I would put my biggest model from my collection for all to look at ! HMS Avenger took approx 3 years to build . " She is a type 21 frigate at 1/64 scale . At 6 feet long . Scratch built on a fibreglass hull from plywood plastic card & metal parts . Works on a six channel futaba skysport .
Full working red & white leds on deck and cabin , lynxs helicopter with working rotor blades with landing lights. Working radars, bofor gun , A ships whooping sound . Runs on two speed 700 motors off a 12volt gel sell battery which give a good 1hr sailling time . Controlled by a 50 amp speed controller with two brass propshafts behind good size rudders which give a excellant turn .
My model HMS Avenger is a copy from the real ship in which took part in the Falklands war in 1982. Painted in the same grey with a green deck . She looks great on display or on the water . Avenger gets a lot of interest from the general public . please enjoy looking at the photos shown at Sheringham & Eaton park Norwich Norfolk .
" thank you .. A Prestney

HI Fellow enthusiasts
The first photo shows the boat as it was bought from an E Bay auction in late February for the price of 14.50, for that price I had to bid on it, even thought I had a new kit of the same model on order from a model shop from the end of December, before VAT went up. The models turned out to be the 4 feet versions some 11 inch wide and now is about 19 inch high. This model turned up several days before the new kit turned up, and was a bit worse for ware than anticipated as the deck had started to part company from the hull. After stripping the deck of all remaining deck furniture the deck was re laminated to the hull, prop shafts and rudder tubes also refitted using plenty of resin and cloth. A rubbing strip was fitted around the deck hull line to tidy up the visible damage. When I was happy with repairs the hull and deck was rubbed down and sprayed. Using the information in the new kit and some photos of actual boats, MJB's (My junk boxes) supplied all the required parts to scratch build 90% of the models fittings as seen, this includes the figures on the deck. These being obtained off an EBay site as 1/24 unpainted train scene figures that required some or may be a lot of adjustments to their appearance. Several items have still to be made and fitted. As I'm working on her sister boat P147, will make extra parts in one go.
The boat has twin electric drives, the motors, MFA 919D series, are fitted with their own 2.5/1 gearboxes and they drive 40 mm three bladed conta rotating brass props. They have independent 15 amp Electonize speed controllers run from two 7.2 volt packs in series. The switching arrangements for lighting has still to be finished off. Don't know if I'll fit a sound system as the boat is for my grandson.
The boat has had several trips on the Society's water at Cwmbran with myself and my grandson at the helm. it seems to go fast enough for him. (The new boat P147 has been built with triple screws.) Can't wait to see both models on the water together.
Hope you have enjoyed the pictures and information.
Regards
GreyWolf

HI all, I was given this model in a rather sad state as it had been in a junk box in a farm out-building and had been subjected to the weather from time to time . it had been there for about 20 yrs or more and the balsa hull was 60% rotten . I think it was originally IC powered but had been fitted with a Graupner Jumbo 6v motor and an old style rheostatic sc, ( I did try using the sc but it sucked so much power I gave it a miss - also had no reverse)
Amazingly the motor and sc still worked and with a bit of oil and cleaning the motor is still running well ! I'm using a 1975 Futaba 24v 10A sc and 3cell LiPo which pushes it along nicely. I stripped everything and replaced large bits of the hull, (which was fun as every time you picked it up you would poke another hole in it it was so fragile !) I got it to the stage where it would hang together fairly well and glassed the hull which has made it like the proverbial "brick one". The rest was very careful sanding of the deck and cabin, (they were ply so fared a bit better) and a lot of little filling bits to get it right.
Nav lights and cabin lights all work from the micro switch board, the curtains are left over Graupner Commodore (1975), I've added a mast, new windows,flag pole, cleats, ladder and handrails. Any ideas as to its manufacturer would be great. I have seen another one on our local "Trade Me" web site recently.

bought this 50inch hull off ebay and thought I would try a make a boat just with my own idears and this is how it turned out,powered by a 720bb motor,12inch propshaft and a 60mm 3 blade brass propellor.all built from odd bits of wood in my shed. installed wood in bottom and then filled with a two part epoxy resin

I have admired this design for many years, along with a lot of Vic Smeed's drawings.
This model is enlarged by 1.7 giving a length of 36'' and a scale of 1:16. The finished boat weighs about 15 1/2lbs and is powered by an MFA 919D 540 with 2.5:1 reduction, using an Mtroniks ESC and Planet 2.4ghz radio.
The hull was planked in obeche on 6mm ply keel and frames with mahogany blocks at bow and stern. The photos were taken on her maiden voyage at Crealy in Exeter.

Ahoy
Here is another of my RC collections this the Revell of Germany Corvette SNOWBERRY. My spouse got this kit 7 years ago for my 64th birthday. I never got one of these before I know that Matchbox made this kit and went out of buisness. in overal view this is the Matchbox kit. I was overjoyed when my wife present this kit to me.After opening the kit examining the contents in the kit the hull comes in four peices two bow sections port and starboard. Two stern sections Port and Starboard.. To my horror they gave me two port bow sections. all there to do is to email the company and filed a complaint about the problem but it got worse. with the instruction sheet in my hand I gave them the part No. I need the Starboard bow section 2 weeks later they sent me another port bow section now I have 2 of them. This time I gave them a piece of my mind, I finally called up the company and filed my complaints. they were very humbled over this and they opoligized greratly. 3 weeks later a UPS truck pulled in. the driver approached my door with a huge box and a package I wondered with excitement whats this of. They sent me a new kit and the starboard bow section. What a del of the century, you dont see that no more.

As to the kit a modlers delight this kit is loaded anyone who has built this kit will share the same experince to the attention of detail. the hull length is 36 inch,s scale is 1/72 there aree plenty of room for your RC gear it to can make a good static model as well. Mine is powered by a dumas 6.0 volt electric motor with speed controll. 2 channel system. to make a stronger model for RC opperation use epoxie. The hull comes in 4 sections leaveing no seams to fill. on back of the instruction sheet they give you a selection of color schemes and ships names. I like the north Atlantic color schedule. So I modeled mine as the Snoewberry. These kits still can be purchased I see thgem all the time on ebay.

Boats

First trials of freshly restored 1970s Aerokits Swordsman rescued as a wreck from ebay (I was the only bidder it looked so bad....!) earlier this year. Was diesel powered and had loads of lead ballest glassed into hull which had to be cut out and replaced with new ply with the rest of the structure lightened and stiffended with new ply. Now fitted with Turnigy 600 Typhoon Brushless and 90A Seawing ESC and 55 min Graupner prop. Handling is excellent and turns really well using a small size Graupner rudder with fast acting large angle Hobbywing servo. Joined my collection of 34 and 46 Fireboats, Sea Hornet, Sea Queen and Commander, all restored over the past 3 years. Aerokits have come into their own with clean and quiet brushless power we could not dream of in the 1960s

FijI class Cruiser, semI scratch built on a Fleet scale hull, plans also supplied by The Maritime Museum Greenwich, built as refitted in 1953

1. The sorry state of the Hull on the Fire Boat. Purchased from Ebay about 6 months ago, only now just started working on refurbishing it, it was covered in car body filler.

2. After about 2 weeks of very hard work it looks much better. it is running on a Johnson 600 size motor and 6v Gel Battery for its first sail at the Cwmbran Model Society tomorrow, so I hope that is will be OK. it does not appear to be an Aeroits model as the cabins remove from the hull. Not just the Cabin tops. I will try and supply some action photo's later.

My thanks to Mosquito Boat Hobbies for their semi-kit... saved me weeks of work... probably months. it's a shame Dumas has stopped making their 48 inch hull. I was lucky to score this hull on EBAY. Runs on two max size Astro Flight motors with a 12 volts.

I took advantage of some nice weather to take my Wavemaster out for a spin this afternoon. She's around 58 years old, I bought her from the son of the original builder and have tried to keep it as original as possible so converted from IC to electric, repainted the lower hull, new stainless inner propshaft, made some handrails and fitted the lights. it was very dirty but has cleaned up a treat. I'm running a Darke Horse 700 with a 7.2v 4300Ah battery for these pictures but have the facility to use either one or two sticks, run time today over 30min with some to spare so I'm well pleased! it's a gorgeous classic boat.