Hi, this is Hercules 51" L 14" Beam was scratched built
12 years ago . it's powered by 2 robbie 1000 off a 12v
battery with a vantec ESC . it has a working fire monitor
2 sound systems with 2 -4" Kort Nozzels .
It is all planked by Cherry veneer deck and superstructure
It olso has working lights for the night runs.
I run this tug evry weekend for the past 10 years and it
still looks new . I live in Whitestone NEW York and I
belong to the Empire State Model Mariners Club .
Check us out at Empire State Model Mariners RC Groups
I am Band1.

My model of Soclaine (MGS) Built in 1985. Trawler kit originally called le Zenith 1/24 Scale. My name change is in memory of our beautifull daughter who went to heaven just over four years ago. Anyhow model is beautifull on the water powered by Como MFA 919 Series Electric Motor.
All power is from a lead acid 12 volt battery,lights, running gear . Using a simple set up of two channel Planet T5 Radio.
I sail the boat at Rutherglen Boat Club Glasgow. The weight of this boat is really awesome and I kept adding lead untill it was nearly Impossible to lift,must be getting soft in me old age.. 👍 lol Deck crane is made from odds n ends and an addition..IAN

I have found that a parallel ribbon cable from an old desktop computer (80 way type) are ideal for mast lights or working Radar etc. and can be glued down neatly.

The end connectors are easily removed without damaging the cable. it is possible to separate two or three insulated wires or however many wires or pairs you need to run to different areas of the hull or the superstructure.

For mast lights or radar etc, I found that wires in pairs are the best way to feed multiple pairs of wires up a mast tube etc. (It helps to feed wires through tubes with a dab of talcum powder to ease the wires through). I was able to run 4 pairs of these fine cables up a 3mm mast tube.

The wires are single strand insulated and easy to solder onto led's or bulbs with very fine heatshrink tubing to insulate. Because these wires are very fine the lights or radar supply should be fused at a low amperage rate. 250mA in my Tug.

Here is a Graupner Bremen 9 converted to represent a UK Police boat. She is called DEVA which is the Roman name for the county capital of Cheshire - Chester.

If the Cheshire Constabulary owned a vessel of the size of the original Bremen 9, I am reliably informed that the 'Battenburg' and transom diagonal stripes would be correct. The 'BA 07' lettering on the superstructure is also the correct national and regional code for the Cheshire Constabulary. The constabulary crest on the cabin doors however has now been superseded by a more modern constabulary logo that looks sh1te.
The RIB provided with the kit is too small and in my opinion not to scale; I will replace it at some point. The light bar and all other blue and navigation lights work off 9v batteries.
Chris M

This model was built from a model slipway Tamar kit. it was modified substantially.all rails are soldered brass. info was from the website of Peterhead R.N.L.I. Station were there are excellent photos. The models engines are thumper motors 4240' at 900kv and run on three cell lipos @ 5000ma. Which give me at least an hour. With a speed of at least 10 mph, which lifts her bow out of the water,way passed the bow thruster , which is a graupner 400. Radar works through an old servo . Flashing blue light on mast. Running and accommodation lights. These boats are normally red below waterline however Scarborough life boats have always been white below the waterline. The crew are star war figures modified with plastic putty and a sharp knife. Not an easy build but very enjoyable. Eric Plaxton was the chairman of plaxtons coaches, and platoons building services. He left 9 million pounds to the boro of Scarborough, and 3 million to scarborough R.N.L.I., for a new boat .

Lady Wooes, by Mobile Marine of Lincoln. SemI kit. I bought the hull all the timber and drawings along with dozens of white metal fittings ages ago, started it and left it for 5 years, moved to North wales and finished it. Drive is 2 Ford Cortina fan heater motors driving a pair of 55mm Prop Shop props by tank steering, reciprocating steam engine sound board, smoke unit and full working lights all from 2 X 12 v 7 Amp batteries........a good and interesting but very frustrating build to get things right.
Sailed at Erias Park, Colwyn Bay Model Boat Club and sometimes at West Shore LLandudno.

This model was scratch built from US Coast Guard plans. The boat is constructed of balsa wood and the hull coated with fiberglass resin. All the deck gear is scratchbuilt from brass, the propellers, led's and figures are the only commercial parts. Scaled at 3/4=1 foot the model measures 42 inches in length.
It's powered by a Pittman 12 volt motor and controlled by a 4 channel radio. Working features are running and spot light, siren with flashing blue light, sweeping radar antenna and deck lights. Built in 1985 the model the lifeboat is accurate in appearence for that time period.(The prototype has been modified since).
The actual lifeboat is attached the the Coast Guard's Motor Lifeboat School at Cape Disappointment and is one of four boats of this class.

this is the Vanquisher, she was the first Diesel powered ship towing tug built for the thames in 1955.
the model is scratch built plank on frame, with 12volt motor, lights,and revolving radar.

I built this one about 3 years ago she is built at 1/24th scale 50"long and is a plank on frame hull , scratch built using lime wood planking and 9mm ply for the frames and keel, the rest is birch ply of various thicknesses.
she has a 12volt cooling fan motor driving a 4" prop,and has a 12volt 48amp hour battery ,plus some lead for ballast,with working lights and revolving radar scanner

J. R. MORE - LAST OF THE LARGEST STEAM TUGS BUILT ON THE CLYDE. The best looking tugs ever built!

This model is scratch build at 1:48 scale of the SAR&H Durban tug J. R. More, which was the last large steam tug built on the Clyde in 1962.
It took over 2 years to complete this model, which was my first scratch build from the modified plans of a sister tug called the F.C Sturrock, which was also stationed at Durban as the shift tug for that harbour. Other tugs of the class were also stationed at Port Elizabeth and Cape Town.

The J. R. More was the newer day tug in Durban, most often used to service the Union Castle ships and others in, out of Durban and remembered by so many visitors to South Africa of that time.

This model tug on the water has differential motor control, software linked with the rudder, can go about on the spot and a delight to sail as a model, capable of 6 or more hours on the water. Working Rotating Radar, lights and woop-woop sounder as per the original tug. I would also like to install the Telegraph bells, however these would drive fellow modellers to distraction, as they were a very distinctive sound and very regular, Implanted and well remembered by the crews and those in and around the harbour, even today. The engines on the other hand were almost quiet and by all accounts very reliable.

This model is ballasted mainly by two 7 Ah 12 Volt SLA Batteries for the main drive motors and a 2 Ah 12 Volt SLA (Aft ballast) for the Lights, Radar and Sound unit. All up weight is 14Kgs and capable of above scale speed from the two MFA 6:1 ratio Geared Motors driving two 4 bladed 70mm screws.

This model has onboard charge regulator circuit, built-in minature dual volt meter to allow quick on-board voltage inspection and single plug-in charge and regulator socket for charging all 3 Batteries together.

The actual full size J. R. More tug still survives and can be visited at the Durban Maritime Museum in Durban, South Africa. Local supporters are undergoing essential repairs, restoration and preservation with private and company financial support.

J R More is the only surviving large steam tug left of this class and as Important to the skills of the Scottish shipbuilders of the Clyde.

Well, it took 24 years of "on again-off again" building but now its finished. I started the model the day we put the CAMPBELL in commission(I'm a plankowner) in 1988.The model measures 6 feet in length and is scaled at 1:48. The entire model is scratchbuilt from wood (hull, superstructure, deck) and few commercial parts were used. it's powered by two Dumas 12 volt motors as a direct drive system. I had hopes of adding working features such as lights, rotating radar antennas, articulating gun, working anchor but I was just happy to get it finished! it will probably make at least one run at the lake come springtime but the models ultimate "homeport" will be a museum, at 6 feet in length(and 40 pounds of ballast) it's a bear to handle just to get it into the car for transport. Still, I'm happy with the results, it was a model of a lifetime(but I'd never build another one like it)! 😉

This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her