I Scratch built this model in 2012 based on Mark Porter's plans.

Hi Model boat enthusiasts,
This is a photo of almost completed 2 model boats I have almost completed. The Sea Queen 50 years old find. it was found in an attic in a kit. The kit was in a very poor state and most of the timberwork had to be glued back together or remade. I had no plans for it and had to source a copy from the Model Boat website. it is a very nice model. The pilot boat was scratch built and sails very nicely. I have been building boats for about 30years and have built over 25 boats, scratch built all of them. I have included photos of some of my boats.

I fist bought the plans when I was about 12. 50years later I decided to build the boat. it took me about 6months to build. The plans are the original Sufury but with a few changes. The cockpit is similar to that of a cigarette boat, extended the length and added a duck board. The power plant is 2100kv brushless moter, a 120amp speed control, 4mm flex sharftwith 2 11.4volt lipo batteries. in a straight line the boat is fast, but she really leans over when turning. Such is life is fun to drive.

this model was built1959 by my brother its based on a thames cruiser similer to the dunkirk little ships built from plans and is planked over frame consruction ive just completely refurbished after it fell into disrepair due to damp storagefound some pics of boat prior to recent refit you csn model is down inthe bows due to an intake of water hence the the refit ken0191

Sailing well in the sun and sparkling waters. A NZ Scow scratch built from plans. Unusual trading schooner based on those from the Great Lakes, USA.Actual vessel now restored as an example of an early NZ coastal trader.

So here’s my partly completed Riva Aquarama, to be named Ciao Bambina, a scratch build from plans, with laser cut marine ply as the base structure. I started her in April 2016 and got to the stage of balsa wood stringers as per the plans and got into a real pickle, breaking pretty much every strip and gave up after six days of struggle. I then focused on Plan B, which was Project 2, a smaller Riva Aquarama, and again a scratch build, for an event planned with friends at the end of April 2016. I’ll come back to Ciao Bambina once I have completed my Sea Commander and the smaller Riva I think. The stringers will be made with laminated 3mm strips Okichi or similar, which is the way the Sea Commander has been done, so I have learned something from the experience. Balsa doesn’t really work on a big stringer! I will update as I progress the project.

The Skiff is taking shape a scratch build from the pictured book of plans. I am using mahogany which I cut using my table saw

so here is the long awaited video of my scratch built Solent Class lifeboat based on the vintage Aerokits plans purchased on ebay. Sailed today for the 1st time and went like a dream, so pleased with it.

This is my just finished Solent built from the original plans and templates which I bought on eBay. Like many others on this forum, I have come over from aircraft, so that knowledge gave me s head start building this. She will hopefully get her first outing next week weather permitting!

This was just finished by my brother after a four year build. He used plans from the original sternwheeler from Whitehorse, Yukon, Canada. We grew up there so there is a connection. She is seven feet long and the hull is built entirely from popsicle sticks. She is bound for the museum in Whitehorse as a static display.

Old boat of my fathers built from scratch in balsa wood, and fibre glassed inside. Use to run a small diesel engine, I took over it and initially put an Orbit 805 motor in then later a better spec model car motor 545/550 water cooled. Finally I swapped it for a 1.25cc glow engine and this video demonstrates the speed with the glow engine. Was almost too fast for the hull, tight turns caused it to nose dive, and plane/wobble badly on its side. Great fun and cheap to run.

I built this from a set of plans that i had sized up it measures 43"x12" & runs on a 1400kv Outrunner Motor / 40A esc / 11.1v 5000mah battery 3 bladed Brass 50mm M4 Prop
I was waiting delivery of a new camera so could not record the earlier stages of the build